> Do you have simulation working? Let's fix it, so you could monitor the > waves.
When I try to simulate, ISE comes up with this: ERROR:HDLCompiler:31 - "/home/xilinx/359test_8.0.7/ddr.v" Line 229: <Debug> is already declared. ERROR:HDLCompiler:598 - "/home/xilinx/359test_8.0.7/ddr.v" Line 81: Module <ddr> ignored due to previous errors I remove the corresponding line and then restart the simulation. Then the simulation runs for some seconds and then aborts with this error: ERROR:Portability:3 - This Xilinx application has run out of memory or has encountered a memory conflict. Current memory usage is 2881200 kb. You can try increasing your system's physical or virtual memory. If you are using a Win32 system, you can increase your application memory from 2GB to 3GB using the /3G switch in your boot.ini file. For more information on this, please refer to Xilinx Answer Record #14932. For technical support on this issue, you can open a WebCase with this project attached at http://www.xilinx.com/support. But the thing is that we use a Linux-system... Is it normal that the simulation consumes that much memory? As the code we currently have for wavelet transformation is based on VHDL, we cannot use Icarus. Jens _______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
