Adam, http://wiki.elphel.com/images/7/71/10338d.pdf has the PCB layout, the connector is on the pages showing LAYER-4 (BOTTOM SIDE), the layer is shown as seen from top side.
On you image the pin 1 is on the bottom left side, pin 2 - on top left, pin 3 - second from the left on bottom, etc. These pins do not include the for mounting pins (no electrical contact) that are in the 4 corners of the connector: X-2-4-6...30X X1-3-5-7...29-X "X" - mounting pin, no connection to the cable "-" - space "1".."30" - electrical pin The cable (sensor end) when pointed sensor end up, looking at the contact side will be numbered sequentially 1-2-3-...-29-30 On Tue, Mar 15, 2011 at 10:03 PM, Adam Gobi <[email protected]>wrote: > Thanks for your reply Andrey, but I couldn't see what you were referring > too. Instead, I've attached a picture to remove any potential ambiguousness > from my original question of left, or right. > > Thanks, > ag. > >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
