Hi Andrey and thanks for the info. Do I just build the 333 based firmware using the newer SDK and then flash it using net boot on the 353 or do I need to do source modifications in order to be able to compile the code on the 353?
In the process you pointed to I assume that I just replace the section pointing to the Elphel source with my own, is this correct? Please advise. K On Aug 25, 2012 9:44 AM, "Andrey Filippov" <[email protected]> wrote: > Hello Khashayar, > > NC353 camera has a different processor than earlier model 333 (ETRAX FS > vs. ETRAX 100LS), so the firmware has to be built with the newer SDK (see > http://wiki.elphel.com/index.php?title=Elphel_Software_Kit_for_Ubuntu ). > > Andrey > > On Fri, Aug 24, 2012 at 4:16 PM, Khashayar Azad <[email protected]> wrote: > >> Is there a hard reset button on the nc353l unit, like the button on the >> 333 model? >> >> Also what's the procedure of doing a network boot on the device? I'm >> trying to flash a custom firmware using flashitall command. My firmware was >> built on the 333 model, will I be able to use the same firmware or not due >> to the considerable difference in versions? >> >> >> Please advise. >> >> K >> >> >> _______________________________________________ >> Support-list mailing list >> [email protected] >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> >> >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
