Hi Andrey, thank you very much for your answer. It actually helps a lot. Cheers.
Be Tireless K T: +61 2 8003 4787 F: +61 2 8103 2029 M: +61 400 419 626 On Wed, Sep 5, 2012 at 3:24 PM, support-list < [email protected]> wrote: > ** > Hello Khahsayar, > > Porting 333 code to the 353 maybe as easy as recompiling it using the > appropriate SDK or it may require re-writing of the code if it relies on > some hardware-specific features that are different in the newer cameras. > The second is not very likely because generally both the 353 hardware and > software are more advanced than used in the earlier model, but still there > is no universal answer to your question - it depends on the specifics of > your project. > > What I would recommend is to follow documentation on > http://wiki.elphel.com/index.php?title=Elphel_Software_Kit_for_Ubuntu and > recompile and reflash the camera from source, then add/modify your custom > code. If you'll get any specific problems in the process - please do not > hesitate to describe them here and we'll try to help you to resolve them. > > Andrey > ---- On Tue, 04 Sep 2012 21:54:24 -0700 *Khashayar Azad <[email protected] > >* wrote ---- > > Hi Andrey, any update on this? Can you help? > > Be Tireless > > K > > T: +61 2 8003 4787 > F: +61 2 8103 2029 > M: +61 400 419 626 > > > > On Sat, Sep 1, 2012 at 7:11 AM, Khashayar Azad <[email protected]> wrote: > > Hi Andrey and thanks for the info. Do I just build the 333 based firmware > using the newer SDK and then flash it using net boot on the 353 or do I > need to do source modifications in order to be able to compile the code on > the 353? > > In the process you pointed to I assume that I just replace the section > pointing to the Elphel source with my own, is this correct? > > Please advise. > > >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
