Hi Andrey, any update on this? Can you help? Be Tireless
K T: +61 2 8003 4787 F: +61 2 8103 2029 M: +61 400 419 626 On Sat, Sep 1, 2012 at 7:11 AM, Khashayar Azad <[email protected]> wrote: > Hi Andrey and thanks for the info. Do I just build the 333 based firmware > using the newer SDK and then flash it using net boot on the 353 or do I > need to do source modifications in order to be able to compile the code on > the 353? > > In the process you pointed to I assume that I just replace the section > pointing to the Elphel source with my own, is this correct? > > Please advise. > > K > On Aug 25, 2012 9:44 AM, "Andrey Filippov" < > [email protected]> wrote: > >> Hello Khashayar, >> >> NC353 camera has a different processor than earlier model 333 (ETRAX FS >> vs. ETRAX 100LS), so the firmware has to be built with the newer SDK (see >> http://wiki.elphel.com/index.php?title=Elphel_Software_Kit_for_Ubuntu ). >> >> Andrey >> >> On Fri, Aug 24, 2012 at 4:16 PM, Khashayar Azad <[email protected]>wrote: >> >>> Is there a hard reset button on the nc353l unit, like the button on the >>> 333 model? >>> >>> Also what's the procedure of doing a network boot on the device? I'm >>> trying to flash a custom firmware using flashitall command. My firmware was >>> built on the 333 model, will I be able to use the same firmware or not due >>> to the considerable difference in versions? >>> >>> >>> Please advise. >>> >>> K >>> >>> >>> _______________________________________________ >>> Support-list mailing list >>> [email protected] >>> >>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>> >>> >>
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
