Denis, We could definitely communicate in Russian, but most other readers of this mailing list would need Google Translate or similar :-) You may try using ARP as described on this wiki page http://wiki.elphel.com/index.php?title=Network_configuration , just remember that it is active first couple minutes after the camera is powered up. And it may boot about a minute.
Andrey ---- On Sun, 28 Feb 2016 23:43:42 -0800 <smedeni1...@gmail.com> wrote ---- Андрей, здравствуйте ) Давайте перейдём на русский? Я Вам писал по поводу камеры 323-2. Я не понимаю, как соединится с камерой. Распишите пожалуйста подробнее мои шаги, обязательно ли использование Wincamp?) С уважением, Денис Отправлено с iPhone 29 февр. 2016 г., в 10:26, support-list <support-list@support.elphel.com> написал(а): Hello Denis, Camera does not have "factory reset", the button just allows to reflash it over the network. As you purchased used Google camera, it probably has some Google network local IP. It is likely to be in 10.0.0.0/8 range, not in 192.168.0.0/16. I'll find out - there was some way to connect to the camera with unknown IP. Andrey ---- On Sun, 28 Feb 2016 22:20:12 -0800 Denis Smetankin<...@gmail.com> wrote ---- Hello! We bought Elphel 323-2 camera for scientific purposes ( S/N 000E6403097A ) . Having trouble connecting to a computer . We established the factory settings by pressing the button , but there is no connection with the node 192.168.0.9. Please, sequence settings for the network connection of a computer and a camera . Maybe get instructions ( detailed Datasheet) for the operation and setting of this camera. Thank You!) _______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
