Thanks a lot! I will make some tests and I'll keep you posted.
Regards, Fred On Thu, Mar 8, 2018 at 4:09 PM, Oleg <support-list@support.elphel.com> wrote: > Frederick, > > 1. Here are the files: https://community.elphel.com/files/393/20180308_ > test_0x5d/ > > 2. Before copying - boot from the card and check the linux version: > >> root@elphel393:~# uname -r >> 4.9.0-xilinx-v2017.3 > > > * If it's 4.9.0-xilinx-v2017.3 then copying only devicetree.dtb and > uImage might be enough - they are on the FAT partition of the card. > * In case of fail if you use minicom (or putty or other serial terminal > program) there will be some kind of a kernel panic. > > 3. > My bootlog for 0x5d: > >> ... >> [ 21.692018] {0} Setting i2c_addr to 0x5d >> [ 21.696039] Read i2c (port = 0, sa7=0x5d, reg=0x0) chip ID=ffff >> ... >> [ 21.747074] {1} Setting i2c_addr to 0x5d >> [ 21.756495] Read i2c (port = 1, sa7=0x5d, reg=0x0) chip ID=ffff >> ... >> [ 21.807904] {2} Setting i2c_addr to 0x5d >> [ 21.817282] Read i2c (port = 2, sa7=0x5d, reg=0x0) chip ID=ffff >> ... >> [ 21.868874] {3} Setting i2c_addr to 0x5d >> [ 21.878291] Read i2c (port = 3, sa7=0x5d, reg=0x0) chip ID=ffff > > ... > > > bootlog for 0x48 (2 sensors connected): > >> ... > > [ 21.607985] {0} Setting i2c_addr to 0x48 >> [ 21.612007] Read i2c (port = 0, sa7=0x48, reg=0x0) chip ID=1801 >> [ 21.617888] Found MT9P001 2592x1944 sensor, chip ID=1801 >> [ 21.674977] {1} Setting i2c_addr to 0x48 >> [ 21.684454] Read i2c (port = 1, sa7=0x48, reg=0x0) chip ID=1801 >> [ 21.690690] Found MT9P001 2592x1944 sensor, chip ID=1801 >> [ 21.747575] {2} Setting i2c_addr to 0x48 >> [ 21.757033] Read i2c (port = 2, sa7=0x48, reg=0x0) chip ID=ffff >> ... >> [ 21.808291] {3} Setting i2c_addr to 0x48 >> [ 21.817738] Read i2c (port = 3, sa7=0x48, reg=0x0) chip ID=ffff >> ... > > > Best regards, > Oleg Dzhimiev > Electronics Engineer > phone: +1 801 783 5555 x124 <(801)%20783-5555> > Elphel, Inc. >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
