Oleg, Thank you. That worked.
I was also having another problem. I've been using 14 MPix sensors. I followed the instructions on the new update and was able to get them to work. However, when I use this SSD, the sensors don't seem to work anymore. Is there a fix for this? Regards, Mohamed On Thu, Apr 5, 2018 at 4:41 PM, Oleg <email@example.com> wrote: > Hi Mohamed, > > 1. http://camera-ip > Recorder > docs: https://wiki.elphel.com/wiki/Camogmgui > > 2. There should be 2 partitions on SSD: > sda1 ~6GB - formatted to EXT4 - sda1 is automounted to /mnt/sda1 (check > with 'df -h' or ) > sda2 ~122GB - not formatted - for 'raw' recording > > If it's not formatted, see 4b.. > > Other info: > 3. To check if SSD is detected: > > 3a. > >> root@elphel393:~# cat /proc/partitions > > > 3b. > >> root@elphel393:~# dmesg > > > Example output: > >> [ 23.160946] ata1: SATA max UDMA/133 mmio [mem 0x80000000-0x80000fff] >> port 0x100 irq 163 >> [ 23.510004] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 23.517599] ata1.00: ATA-9: TS128GMTS600, P1225CE, max UDMA/133 >> [ 23.523846] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 0/32) >> [ 23.532486] ata1.00: configured for UDMA/133 >> [ 23.541610] scsi 0:0:0:0: Direct-Access ATA TS128GMTS600 >> 5CE PQ: 0 ANSI: 5 >> [ 23.555202] sd 0:0:0:0: Attached scsi generic sg0 type 0 >> [ 23.555418] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 >> GB/119 GiB) >> [ 23.556425] sd 0:0:0:0: [sda] Write Protect is off >> [ 23.556437] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> [ 23.556545] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >> enabled, doesn't support DPO or FUA >> [ 23.583494] sda: sda1 sda2 >> [ 23.591877] sd 0:0:0:0: [sda] Attached SCSI disk >> [ 24.171488] random: nonblocking pool is initialized >> [ 24.950555] EXT4-fs (sda1): recovery complete >> [ 24.956238] EXT4-fs (sda1): mounted filesystem with ordered data mode. >> Opts: (null) > > > 3c. > >> root@elphel393:~# hdparm -I /dev/sda > > > > > 4. Some information if you would like to reformat it: > 4a. https://wiki.elphel.com/wiki/Format_SSD_MMC#SSD_or_USB > Mainly it's 2 programs: fdisk and mkfs > > 4b. http://192.168.0.9/format_disk.php > > Let me know if you have any further questions or need more details. > > Best regards, > Oleg Dzhimiev > Electronics Engineer > phone: +1 801 783 5555 x124 > Elphel, Inc. >
_______________________________________________ Support-list mailing list Supportfirstname.lastname@example.org http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com