Well, it should be the VM indicated in the text, it was itself which wrote it when I hit ctrl-Break...
The symptoms are: Fred get stuck thinking that the machine is overloaded when it in fact doesn't have a thing to do. The fred load indicator is at 100% (or slightly above when viewing the textual value), taskmanager indicates a load of say, about, 5% which definitely is the correct number since the machine is as usable as if fred where shut down. Current routing time is 0 ms and the node is still QueryRejecting. I run two nodes and both exhibit the same problem. Both are running WinXP Pro and the same VM. This dump was from a my 629 node. No bandwidth-limiting or such enabled. No fiddling around with any config values except the most basic ones done. /I ----- Original Message ----- From: "Matthew Toseland" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Tuesday, December 24, 2002 1:34 AM Subject: Re: [freenet-support] Stale threads _______________________________________________ support mailing list [EMAIL PROTECTED] http://hawk.freenetproject.org/cgi-bin/mailman/listinfo/support