To configure your firewall you need to 1. Let *ALL* outbound traffic from *ALL* local ports pass out through your firewall onto the internet. This is because Freenet sets up connections to external nodes and there's no telling which local port numbers it will be using at any time. This is just the same as allowing outbound traffic from an FTP client and, 2. Let *ONLY* inbound traffic *to your freenet port* pass from the internet thru the firewall onto your computer.
Your freenet port by the way is the one that shows up on the first page of the Configuration utility, or if you don't use that it's the line in freenet.ini called listenPort If your firewall is also a NAT router, you may also need to enable a mode on the firewall called 'virtual server' - this ensures that inbound requests to this port actually get routed to *your* computer - so you may need to enter your PC's IP address into your firewall configuration. If your firewall is just software-based and installed on the same PC as freenet then you don't need to do this step. ----- Original Message ----- From: "Steven" <[EMAIL PROTECTED]> To: "Dave Hooper" <[EMAIL PROTECTED]> Sent: Wednesday, November 05, 2003 5:06 PM Subject: Re: [freenet-support] route not found > My freenet.log is huge! over 2 megs. I wouldn't know what to look for! Here > are a couple of chunks: > > Nov 4, 2003 3:19:40 AM (freenet.node.states.announcing.Announcing, > QThread-601, NORMAL): Announcement failed to e68a dee9 33d8 f78c 26d0 a615 > 4053 bc8d 31bb 4604 at depth 2:freenet.SendFailedException: Against peer > DSA(e68a dee9 33d8 f78c 26d0 a615 4053 bc8d 31bb 4604) @ null - No open > connections and can't contact node (terminal) > Nov 4, 2003 3:19:40 AM (freenet.node.states.announcing.Announcing, > QThread-603, NORMAL): Announcement failed to 62ee 2c69 5842 0f66 5e0b 9230 > cb98 3712 0bbc fd66 at depth 2:freenet.SendFailedException: Against peer > DSA(62ee 2c69 5842 0f66 5e0b 9230 cb98 3712 0bbc fd66) @ null - No open > connections and can't contact node (terminal) > Nov 4, 2003 3:19:40 AM (freenet.node.states.announcing.Announcing, > QThread-605, NORMAL): Announcement failed to 30e8 f6ad 1382 0b65 7eff bf79 > 55d2 2bc3 8971 982d at depth 2:freenet.SendFailedException: Against peer > DSA(30e8 f6ad 1382 0b65 7eff bf79 55d2 2bc3 8971 982d) @ null - No open > connections and can't contact node (terminal) > > > [EMAIL PROTECTED]:freenet:[EMAIL PROTECTED] AGcPAgM/TFE//@15,true > before failure > Nov 4, 2003 3:30:22 AM (freenet.client.GetRequestProcess, QThread-609, > NORMAL): Event: RouteNotFound, reason: No route found for > [EMAIL PROTECTED]:freenet:[EMAIL PROTECTED] AGcPAgM/TFE//@15,true > before failure > Nov 4, 2003 3:30:22 AM (freenet.client.GetRequestProcess, QThread-609, > NORMAL): Event: State PREPARED reached. for > [EMAIL PROTECTED]:freenet:[EMAIL PROTECTED] AGcPAgM/TFE//@15,true > before failure > Nov 4, 2003 3:30:26 AM (freenet.node.Main$InsertARK, QThread-605, NORMAL): > RouteNotFound Inserting ARK > Nov 4, 2003 3:30:31 AM (freenet.node.Main$InsertARK, QThread-605, NORMAL): > RouteNotFound Inserting ARK > Nov 4, 2003 3:30:36 AM (freenet.node.Main$InsertARK, QThread-605, NORMAL): > RouteNotFound Inserting ARK > Nov 4, 2003 3:30:41 AM (freenet.node.Main$InsertARK, QThread-605, NORMAL): > RouteNotFound Inserting ARK > > By the way, what are all of the ports that i need to keep open? I just > configured my firewall, but freenet doesn't seem to be working. > > > > On Wednesday 05 November 2003 10:11 pm, you wrote: > > Yuh, some connections should be open. Although when you start it up, there > > won't be many connections for a bit unless you start requesting stuff. But > > as you say, you've tried that by trying to retrieve gpl.txt and other > > files. > > > > What does the logfile say? freenet.log > > > > ----- Original Message ----- > > From: "Steven" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, November 04, 2003 12:03 AM > > Subject: [freenet-support] route not found > > > > > I use gentoo, and as far as i can figure out everything is pretty up to > > > > date, > > > > > including my seednode.ref > > > > > > _______________________________________________ > > > Support mailing list > > > [EMAIL PROTECTED] > > > http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support > _______________________________________________ Support mailing list [EMAIL PROTECTED] http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support