rakshat hooja wrote:
On Fri, Aug 29, 2008 at 9:08 AM, syed yaqoob ali
<[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote:
rakshat hooja wrote:
On Wed, Aug 27, 2008 at 7:13 PM, arne anka <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
>> I did connect to the cu using this command : cu -l
/dev/ttyACM0
> But still the same response its going back to the menu
Are you not getting the u-boot terminal on the host PC?
Rakshat
------------------------------------------------------------------------
No,I am not getting the u-boot terminal on host pc .I have
connected the cu and tried to select the option for usb.It is
returning back th same u-bootmenu on freerunner.
What happens on the host computer after you run
cu -l /dev/ttyACM0
And did you do sudo chown uucp.uucp /dev/ttyACM0 before running cu?
My output is as follows
[EMAIL PROTECTED]:~$ sudo chown uucp.uucp /dev/ttyACM0
[EMAIL PROTECTED]:~$ sudo cu -l /dev/ttyACM0
Connected.
ut: usbtty
Err: usbtty
PCB rev: 0x000
Power: 0mA
switching led 2 0
switching led 2 1
switching led 2 0
GTA02v5 # DEVICE_CONFIGURED: 1
DEVICE_CONFIGURED: 1
GTA02v5 #
works each and every time.
Also in new kernels you no longer need to set console to USB as it is already set by default (atleast in
my experience.
Update me if this works.
Rakshat
_______________________________________________
support mailing list
[email protected] <mailto:[email protected]>
https://lists.openmoko.org/mailman/listinfo/support
--
--------------
Please use Firefox as your web browser. Its protects you from spyware
and is also a very feature rich browser.
www.firefox.com <http://www.firefox.com>
------------------------------------------------------------------------
_______________________________________________
support mailing list
[email protected]
https://lists.openmoko.org/mailman/listinfo/support
This is what i get when i try connect to u-boot through cu.
1) I connect the usb and start the new freerunner u-boot menu.
2) Then i use this command at host prompt.:
[EMAIL PROTECTED] /]# sudo chown uucp.uucp /dev/ttyACM0
[EMAIL PROTECTED] /]# sudo cu -l /dev/ttyACM0
Connected.
This is wha ti get on host pc.
I try selecting the console on the usb but it comes back to the same
menu on freerunner.
_______________________________________________
support mailing list
[email protected]
https://lists.openmoko.org/mailman/listinfo/support
