arne anka wrote:
>
> ifdown usb0
> ifconfig usb0 192.168.0.202 netmask 255.255.255.0 up
> route add -host 192.168.0.202 dev usb0
>
> for ubuntu, prefix every line with sudo.
>
> the wiki page lists _all_ of the above!
>
>> http://wiki.openmoko.org/wiki/USB_Networking
>
> please a) read the wiki and b) post useful and complete error messages.
> you never answered, what device was using 192.168.0.202 already nor gave
> really useful information so far!
>
> for windows as ssh client you are probably best off with putty.
>
> _______________________________________________
> support mailing list
> support@lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
>
>
im sory if i'm writing not clear i'try to correct my mistakes
Firstly im using ubuntu 2.6.24
At starting point i disconnect all the network devices from the machine
my lan is disconnected as well
if i do ifconfig i get this output
eth0 Link encap:Ethernet HWaddr 00:14:2a:a9:4d:fb
inet addr:192.168.0.200 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:39863 errors:0 dropped:0 overruns:0 frame:0
TX packets:4764 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5180502 (4.9 MB) TX bytes:622521 (607.9 KB)
Interrupt:16 Base address:0xe400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1831 errors:0 dropped:0 overruns:0 frame:0
TX packets:1831 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:149190 (145.6 KB) TX bytes:149190 (145.6 KB)
After this im connecting my FR with USB cable
and my ifconfig changes to :
eth0 Link encap:Ethernet HWaddr 00:14:2a:a9:4d:fb
inet addr:192.168.0.200 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:39863 errors:0 dropped:0 overruns:0 frame:0
TX packets:4764 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5180502 (4.9 MB) TX bytes:622521 (607.9 KB)
Interrupt:16 Base address:0xe400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1835 errors:0 dropped:0 overruns:0 frame:0
TX packets:1835 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:149542 (146.0 KB) TX bytes:149542 (146.0 KB)
usb0 Link encap:Ethernet HWaddr d2:d8:e1:48:cd:a2
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:39 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:5321 (5.1 KB)
usb0:avahi Link encap:Ethernet HWaddr d2:d8:e1:48:cd:a2
inet addr:169.254.9.209 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
At this point my PC is connected only with FR (no other devices)
here im checking my kernel IP routing table
$netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
192.168.0.200 * 255.255.255.255 UH 0 0 0
eth0
192.168.0.0 * 255.255.255.0 U 0 0
0 eth0
link-local * 255.255.0.0 U 0 0
0 usb0
default * 0.0.0.0 U 0 0
0 usb0
here im trying to add a new route : sudo route add-host 192.168.0.202 dev
usb0
$netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
192.168.0.202 * 255.255.255.255 UH 0 0
0 usb0
192.168.0.200 * 255.255.255.255 UH 0 0
0 eth0
192.168.0.0 * 255.255.255.0 U 0 0
0 eth0
link-local * 255.255.0.0 U 0 0
0 usb0
default * 0.0.0.0 U 0
0 0 usb0
and after this im trying to ssh
#ssh r...@192.168.0.202
ssh: connect to host 192.168.0.202 port 22: no route to host
tnx a lot for your time i really apriciate that i was reading the wiki and
tryed all the staff which it offers with no luck
--
View this message in context:
http://n2.nabble.com/need-sugestions-tp4036447p4050952.html
Sent from the Openmoko Support mailing list archive at Nabble.com.
_______________________________________________
support mailing list
support@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/support