http://www.m0n0.ch/bsd/#knownprobs
http://lists.soekris.com/pipermail/soekris-tech/2004-October/022017.html
--Bill
PS. Scott, note the "especially Lexar" in the m0n0 page? Wasn't it Lexar cards we were trying to use at the hackathon that gave us mixed results?
On 9/5/05, Leuchter, Lars <[EMAIL PROTECTED]> wrote:
Hi Scott
Do you refer to the
set flash=primary
reboot
??
If so, it doesn´t work, at least when using a 512MB Flash-Card. Is there another hack how to make this possible ?
Thanks
Lars
-----Ursprüngliche Nachricht-----
Von: Scott Ullrich [mailto:[EMAIL PROTECTED]]
Gesendet: Sonntag, 4. September 2005 15:24
An: Leuchter, Lars
Cc: [email protected]
Betreff: Re: [pfSense Support] Soekris Net4801
Change your compact flash to primary in the BIOS. There is a blog entry for this as well.
Scott
On 9/4/05, Leuchter, Lars < [EMAIL PROTECTED]> wrote:
>
> Hi all,
>
> I am trying to get the latest embedded image to work on a Soekris
> Net4801, however, after I have written the image to flash-card and
> boot it up, I do get the following error message :
>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A, console
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> Timecounters tick every 1.000 msec
> Fast IPsec: Initialized Security Association Processing.
> ad1: 497MB <SAMSUNG CF/ATA 04/05/06> at ata0-slave PIO4 Trying to
> mount root from ufs:/dev/ad0a
>
> Manual root filesystem specification:
> <fstype>:<device> Mount <device> using filesystem <fstype>
> eg. ufs:da0s1a
> ? List valid disk boot devices
> <empty line> Abort manual input
>
> mountroot>
>
>
> Any idea ?
>
>
> Thanks
> Lars
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
