I use Lexar media and Sandisk. Generally have no issues out of either. Scott
On 9/5/05, Kevin Tollison <[EMAIL PROTECTED]> wrote: > I have good result with PNY cards on Soekris boards as well. > > -- > Kevin > > ________________________________________ > From: Bill Marquette [mailto:[EMAIL PROTECTED] > Sent: Monday, September 05, 2005 10:21 AM > To: Leuchter, Lars > Cc: Scott Ullrich; [email protected] > Subject: Re: [pfSense Support] Soekris Net4801 > > Not all CF cards are created equal. Some are better than others. > > http://www.m0n0.ch/bsd/#knownprobs > http://lists.soekris.com/pipermail/soekris-tech/2004-October/022017.html > > --Bill > > PS. Scott, note the "especially Lexar" in the m0n0 page? Wasn't it Lexar > cards we were trying to use at the hackathon that gave us mixed results? > On 9/5/05, Leuchter, Lars <[EMAIL PROTECTED]> wrote: > Hi Scott > > Do you refer to the > > set flash=primary > reboot > > ?? > > If so, it doesn´t work, at least when using a 512MB Flash-Card.Is there > another hack how to make this possible ? > > Thanks > Lars > > > -----Ursprüngliche Nachricht----- > Von: Scott Ullrich [mailto:[EMAIL PROTECTED] > Gesendet: Sonntag, 4. September 2005 15:24 > An: Leuchter, Lars > Cc: [email protected] > Betreff: Re: [pfSense Support] Soekris Net4801 > > Change your compact flash to primary in the BIOS.There is a blog entry for > this as well. > > Scott > > > On 9/4/05, Leuchter, Lars < [EMAIL PROTECTED]> wrote: > > > > Hi all, > > > > I am trying to get the latest embedded image to work on a Soekris > > Net4801, however, after I have written the image to flash-card and > > boot it up, I do get the following error message : > > > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A, console > > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > > sio1: type 16550A > > Timecounters tick every 1.000 msec > > Fast IPsec: Initialized Security Association Processing. > > ad1: 497MB <SAMSUNG CF/ATA 04/05/06> at ata0-slave PIO4 Trying to > > mount root from ufs:/dev/ad0a > > > > Manual root filesystem specification: > > <fstype>:<device>Mount <device> using filesystem <fstype> > >eg. ufs:da0s1a > > ?List valid disk boot devices > > <empty line> Abort manual input > > > > mountroot> > > > > > > Any idea ? > > > > > > Thanks > > Lars > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
