I have good result with PNY cards on Soekris boards as well. -- Kevin
________________________________________ From: Bill Marquette [mailto:[EMAIL PROTECTED] Sent: Monday, September 05, 2005 10:21 AM To: Leuchter, Lars Cc: Scott Ullrich; [email protected] Subject: Re: [pfSense Support] Soekris Net4801 Not all CF cards are created equal. Some are better than others. http://www.m0n0.ch/bsd/#knownprobs http://lists.soekris.com/pipermail/soekris-tech/2004-October/022017.html --Bill PS. Scott, note the "especially Lexar" in the m0n0 page? Wasn't it Lexar cards we were trying to use at the hackathon that gave us mixed results? On 9/5/05, Leuchter, Lars <[EMAIL PROTECTED]> wrote: Hi Scott Do you refer to the set flash=primary reboot ?? If so, it doesn´t work, at least when using a 512MB Flash-Card. Is there another hack how to make this possible ? Thanks Lars -----Ursprüngliche Nachricht----- Von: Scott Ullrich [mailto:[EMAIL PROTECTED] Gesendet: Sonntag, 4. September 2005 15:24 An: Leuchter, Lars Cc: [email protected] Betreff: Re: [pfSense Support] Soekris Net4801 Change your compact flash to primary in the BIOS. There is a blog entry for this as well. Scott On 9/4/05, Leuchter, Lars < [EMAIL PROTECTED]> wrote: > > Hi all, > > I am trying to get the latest embedded image to work on a Soekris > Net4801, however, after I have written the image to flash-card and > boot it up, I do get the following error message : > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A, console > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > Timecounters tick every 1.000 msec > Fast IPsec: Initialized Security Association Processing. > ad1: 497MB <SAMSUNG CF/ATA 04/05/06> at ata0-slave PIO4 Trying to > mount root from ufs:/dev/ad0a > > Manual root filesystem specification: > <fstype>:<device> Mount <device> using filesystem <fstype> > eg. ufs:da0s1a > ? List valid disk boot devices > <empty line> Abort manual input > > mountroot> > > > Any idea ? > > > Thanks > Lars > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
