At 09:24 AM 9/29/2005, you wrote:
>
> Lan
> |
> |
> Port2 on
switch-----------------------------
> ----port 4 on switch vlan 3------------------win XP
> |
> |
> port 3 on switch vlan 2
> |
> |
> WinXP
>
>
> i'm using a similar config. you don't say what your config on pfsense
is,
> but are you setting up TWO vlan interfaces on the pfsense? e.g.
>
> LAN => fxp0 (or whatever)
> vlan0 => fxp0 vlan 2
> vlan1 => fxp0 vlan 3
>
[alan walters]
Yes the vlans are configured on pfsense as you have outlined above.
Traffic seems to flow into the correct interface on pfsense but does not
get back to the client.
are you sure you have outbound NAT rules for both vlan
interfaces? you might want to post a (sanitized) config...
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
