the freebsd device name is hme:
The hme(4) driver supports the on-board Ethernet interfaces of many Sun
UltraSPARC workstation and server models. Cards supported by the
hme(4) driver include:
* Sun PCI SunSwift Adapter
* Sun SBus SunSwift Adapter .( hme. and .SUNW,hme.)
* Sun PCI Sun100BaseT Adapter 2.0
* Sun SBus Sun100BaseT 2.0
* Sun PCI Quad FastEthernet Controller
* Sun SBus Quad FastEthernet Controller
As for the Intel Pro - different system - that system I was using 1 Intel
Pro 100 (stand alone), 1 Linksys Fast eth (shows up as dc0) and a 3com 3c509
JB
On Thu, September 29, 2005 12:20 pm, Scott Ullrich wrote:
> That NIC is not supported as far as I can tell. If you know the
> device name in freebsd please let me know. Try removing the quad port
> nic and I bet the single nic will work.
>
> Scott
>
>
>
> On 9/29/05, J B <[EMAIL PROTECTED]> wrote:
>
>> I'm having issues with the following NIC cards:
>>
>>
>> Sun Quad Fast Ethernet - not recognized
>> Intel Pro 100 - recognized, but doesn't seem to work - used it as my LAN
>> interface - connected it back to back with another maching using a
>> X-over
>> cable and configured both on the same net - couldn't access the config
>> page
>>
>>
>> any help would be appreciated
>>
>> JB
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [EMAIL PROTECTED]
>> For additional commands, e-mail: [EMAIL PROTECTED]
>>
>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
