Hi
I have 2 WAN connections. The first WAN is ADSL (PPPoE). The second
connection is a high speed cable modem. I wanted to set cable modem as
the first WAN connection - but since OPT1 does not support PPPoE I was
forced to set it up this way.
My SMTP server and NEWS servers are available from my DSL ISP and all
other traffic needs to be routed through my OPT1. I have taken following
steps to set this up:
1. I checked and saved Enable advanced outbound NAT.
2. Setup Any -> Any rule for internal network to OPT1 (very similar to
the automatic rule created for WAN1)
3. Setup a Gateway by specifying a single Gateway in the pool (my DSL
gateway).
4. Then I setup a rule for pass rule to for port 119 and 25 on WAN1 and
set its gateway to the gateway setup in no. 3
After setting this up - I still cannot connect to my SMTP and NNTP
servers via my WAN1. All traffic through OPT1 is working fine.
Any help will be much appreciated.
Thanks
Manuj
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
