Took me a while to test this, especially since I had to recover from 0.89, which stopped my box from booting (complaining about a parse error in dyndns.class).
Not quite there yet, so here's brain food for the gurus (as I've pointed out before, I'm rather new to BSD, coming from the Wintel world). First of all, thanks for the modules, Scott. I've later worked out that ng_ether and ng_iface are already in the kernel, so that only ng_eiface was actually required. I've managed to get the virtual interfaces up and bridged using netgraph, individual MAC addresses and all (don't forget to disable ARP messages or they'll drive you nuts, as you now have multiple interfaces sharing a network). BUT, it doesn't work. It's as if something was stopping "traffic crossing the bridge", even though I don't see an entry in the FW log (default rule). If I test the same on a Freesbie 1.1 box (FreeBSD 5.3), all works fine (well, at least the DHCP server sees the different MAC addresses requesting leases and issues them accordingly, I'll blame the fact that the IP address isn't always contained in the ifconfig output to a "feature"/bug in 5.3s dhclient). There's probably a very easy way to fix this, but I doubt I'll figure it out myself :-) Thanks Thomas -----Original Message----- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Freitag, 21. Oktober 2005 18:12 To: [email protected] Subject: Re: [pfSense Support] Multiplan WAN IPs on same interface via DHCP Great! If you get this working then we will definately look at adding support to CVS head for this. Scott --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
