Image updated. Please give it a try in the ~sullrich directory. On 11/13/05, Emanuel A. Gonzalez <[EMAIL PROTECTED]> wrote: > Thanks again Scott! > > > -----Mensaje original----- > De: Scott Ullrich [mailto:[EMAIL PROTECTED] > Enviado el: Domingo, 13 de Noviembre de 2005 06:39 p.m. > Para: [email protected] > Asunto: Re: [pfSense Support] WAN DHCP not working ? > > That is the issue we just solved. I am building a new version. > > On 11/13/05, Emanuel A. Gonzalez <[EMAIL PROTECTED]> wrote: > > I was working on 0.90a version, and since version 0.62.3 the DHCP on my > wan > > was working fine. > > > > Today I upgraded to a 0.93 version, which I downloaded from a "sullrich" > > link (I know this is not an official release). Now, my dhcp wan doesn't > > work, it assign an IP address for about 20 secs. And then it release it, > and > > re-assign it after 20 or 30 secs. > > > > I try using a static IP on my wan interface, since my ISP uses a DHCP > server > > but it always assigns me the same public IP (that's funny), but it works > > almost the same way. I can ping for about 10 times, then the connections > > drops, then again it restore my connection and I can ping again. This is > > odd. > > > > I decided to downgrade to 0.90a, and the wan DHCP client it's working fine > > again. > > > > I'm sorry for hijacking another post, I just intended to help, maybe this > is > > a bug :) > > > > Thanks again for all your support, we are more than satisfied with your > > outstanding job! > > > > > > Emanuel Gonzalez > > Guatemala. > > > > > > > > -----Mensaje original----- > > De: Scott Ullrich [mailto:[EMAIL PROTECTED] > > Enviado el: Domingo, 13 de Noviembre de 2005 03:10 a.m. > > Para: [email protected] > > Asunto: Re: [pfSense Support] WAN DHCP not working ? > > > > DHCP generally "just works". I would verify that your hardware is > > FreeBSD friendly at this point as it can be very picky. > > > > Scott > > > > On 11/13/05, Ulrik S. Kofod <[EMAIL PROTECTED]> wrote: > > > I'm finally ready to go live with this box, replacing a really horrible > > router that > > > has to be reset every now and then (daily). > > > > > > I unplugged the old router and inserted the WAN cable from the DSL modem > > into the > > > WAN interface on the pfSense box, I then checked the interfaces status > > page and > > > could se that the link was up and dhcp said up but the IP address was > > 0.0.0.0 and > > > netmask was 255.0.0.0. I tried to release it at renew a few times but > > without > > > result. I then tested it in the OPT1 interface with same result. > > > > > > The WAN and OPT1 interfases are both setup to get an IP from DHCP, > nothing > > else > > > changed. > > > > > > I added a print screen of it here if my explanation is a little > confusing > > :) > > > http://www.cybersite.dk/wan_dhcp.GIF > > > > > > Do I need to setup anything except make sure the interface is setup as > > DHCP like the > > > on old router? > > > > > > Best regards > > > Ulrik > > > > > > PS. I reinstalled the old router and it got the IP like it should. > > > PPS. I'm using pfSense version 0.92 on a 233MHz pentium with 64MB memory > > and a 2GB HDD. > > > PPPS. Apart from WAN and OPT1 I also have a LAN and WLAN interfase with > > static IP. > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > -- > > Se certificó que el correo Saliente no contiene virus. > > Verificado por Anti-Virus AVG. > > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - Fecha de la > > versión: 11/11/2005 > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > -- > Se certificó que el correo Saliente no contiene virus. > Verificado por Anti-Virus AVG. > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - Fecha de la > versión: 11/11/2005 > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
