Hi DB, Just had another thought that you may want to run a MEMTEST86 on your system to make sure that your RAM is ok and that it does not have a minor problem.
If you have not used MEMTEST86 before, it is a bootable CD and only about 5MB ISO and can take from a few minutes to a few hours to run. RAM problems can make all sorts of strange errors. If you choose to do this test, it is an autostart and unless you halt the test it will continue indefinitely. Normally the test when run once completely and show OK, further tests may not make any difference to the results. This diagnostic utility is FREE and works well with all RAM types, except it does not recognise VGA RAM, unfortunately. Hope that this is helpful. http://www.memtest.org/ Kindest Regards, Craig Roy Horizon IT Consultants [EMAIL PROTECTED] AUSTRALIAN RESELLER FOR -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Saturday, 22 April 2006 9:15 PM To: [email protected] Subject: [pfSense Support] Re: Booting problem >Right after trying to boot I get a lof of junk (registers and their values in >hex) running endlessly down the screen. Any idea what's wrong? I've just installed FreeBSD 6.1 RC1 on the gateway and it boots fine, so the problem must be with pfSense's kernel or boot manager? br db --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.1.384 / Virus Database: 268.4.5/321 - Release Date: 21/04/2006 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.1.384 / Virus Database: 268.4.5/321 - Release Date: 21/04/2006 --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
