How much RAM in the box? Just a guess, you used a swap partition with the hard drive install, but didn't with the CF install (gee, I can't possibly imagine why not ;-P) and have less than 64M ram.
--Bill On 4/26/06, Tim Roberts <[EMAIL PROTECTED]> wrote: > > I have a piece of junk test box that Beta 3 loaded fine with a 20gb hdd. I > slid a spare Sybia CF-IDE adapter and a 512MB CF card in and Beta 3 ISO goes > through install just fine. Upon bootup it almost gets to the console menu > when it reboots. It does this over and over. I can load Beta 1 on the same > setup fine but not 2 or 3. > > Any ideas? Better IDE-CF adapter? Can anyone recommend a winning combo with > brand name of media? I have had many issues in the past and usually just > play around with different mainboards until I find one thats happy, but this > appears to be PFSense related. > > Mainboard is an old AOpen ATX P3Slot 1 with BX chipset. > > > Thanks in advance --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
