Much Easier, thanks Scott. Also, I did a test on 2 routers (ex 192's) and now I am going to take it onsite and use to Public IP's, but they have the same GW, as they are my dsl lines. I am the ISP. Will there be any complications since they both have the same gateway?
Chris Scott Ullrich wrote: > Update to a recent snapshot or 1.2-BETA-1. > > Scott > PS: yes its stable. > > On 5/18/07, Chris Flugstad <[EMAIL PROTECTED]> wrote: >> Im having a hard time getting this setup. I have the MultiWan/Load >> Balancing doc from PfSenseDocs, but it is slightly different. When I >> try to put in the info, i get >> >> The following input errors were detected: >> >> 192.168.10.99 is currently being referenced by an interface ip address >> on wan. >> 192.168.2.99 is currently being referenced by an interface ip address on >> opt1. >> >> >> 10.99 and 2.99 are my wan1 and wan2. >> >> Does anyone have an uptodate HOWTO on this? >> >> Chris >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [EMAIL PROTECTED] >> For additional commands, e-mail: [EMAIL PROTECTED] >> >> > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
