I have a pfsense box running 1-2-BETA-1 (built 5/26/2007 @ 16:27:46
EDT) with the following CPU/Memory combination (from dmesg):
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.13-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf65 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,A
CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe59d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-
ID,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Logical CPUs per core: 2
real memory = 2137587712 (2038 MB)
avail memory = 2086600704 (1989 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
We recently purchased a managed switch and started creating VLANs on
both the pfsense and in the switch to tighten up the security of our
small office network. One of the VLAN's that was created was a VLAN
that contains the Backup server and a NAS. (used to store the
backups). The systems that use this backup server are in the general
LAN VLAN. The Backup server VLAN is configured on pfsense on the
general lan's (bge0) interface.
The backup thru-put when the devices where in the same VLAN were
roughly 200/MB/min. With the current configuration the thru-put has
dropped to 21MB/min.
Is there anything that I can change to increase the thru-put and
still allow filtering between the two segments.
TIA
-Ron
--
Ron Rosson
[EMAIL PROTECTED]
http://www.oneinsane.net
