The switch is a Linksys SFE2000. The before speeds are from this
switch I have checked the interface statistics on both the firewall
and the switch ports and they are showing no errors or collisions.
-Ron
On Aug 12, 2007, at 8:43 AM, Pedro Paulo Oliveira Jr wrote:
Your throughput is very low.
It seems the switch is the problem? Can you detail its brand.
From: Ronald L. Rosson Jr. [mailto:[EMAIL PROTECTED]
Sent: sexta-feira, 29 de junho de 2007 10:37
To: [email protected]
Subject: [pfSense Support] Thruput
I have a pfsense box running 1-2-BETA-1 (built 5/26/2007 @ 16:27:46
EDT)
with the following CPU/Memory combination (from dmesg):
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.13-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf65 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P
GE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,A
CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe59d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-
ID,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Logical CPUs per core: 2
real memory = 2137587712 (2038 MB)
avail memory = 2086600704 (1989 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
We recently purchased a managed switch and started creating VLANs
on both
the pfsense and in the switch to tighten up the security of our
small office
network. One of the VLAN's that was created was a VLAN that
contains the
Backup server and a NAS. (used to store the backups). The systems
that use
this backup server are in the general LAN VLAN. The Backup server
VLAN is
configured on pfsense on the general lan's (bge0) interface.
The backup thru-put when the devices where in the same VLAN were
roughly
200/MB/min. With the current configuration the thru-put has dropped to
21MB/min.
Is there anything that I can change to increase the thru-put and
still allow
filtering between the two segments.
TIA
-Ron
--
Ron Rosson
[EMAIL PROTECTED]
http://www.oneinsane.net
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
