No such luck with these cards in that board, tried RC2, 3 & 4 to no avail
Working fine off a P4 box as a temporary measure. I will be getting 1 x Intel quad card and 1 x dual card and hopefully that will do the trick. Will keep you posted Regards, Mike Lever Tenacity Films (Pty) Ltd t/a Velocity Films (T) +2711-807-0100 (F) 086-681-7518 http://www.velocityfilms.com CONFIDENTIALITY CAUTION: If you have received this communication in error, please note that it is intended for the addressee only, is privileged and confidential and dissemination or copying prohibited. Please notify us immediately by e-mail and return the original message. Thank you. -----Original Message----- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: 19 Mar 2008 08:01 PM To: [email protected] Subject: Re: [pfSense Support] Fatal trap 12 during installation On 3/19/08, Mike Lever <[EMAIL PROTECTED]> wrote: > Done ! removed them and it works fine. I put the 2 x Dlinks into an old P4 > its boots up fine ! > > So then the problem is the board ? processor ? > > Can you suggest a board that you know for certain works with either the > dlinks or Intel 4 port cards ? My very uneducated guess about this would be there is something strange in the interrupt routing or APIC code. Make sure your bios is on the latest and greatest version. Scott --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
