On Thu, Jul 24, 2008 at 5:06 PM, Matt Brown <[EMAIL PROTECTED]> wrote: > <snip> > > In m0no: > > Under NAT - OUTBOUND NAT I have the following entries. > > INTERFACE - SOURCE - DESTINATION - TARGET - DESC > > WAN - 192.168.102.3/32 - * - x.x.x.186 - Orion -> .186 > > WAN - 192.168.102.10/32 - * - x.x.x.187 - Pegasus -> .187 > > WAN - 192.168.102.2/32 - * - x.x.x.188 - Max -> .188 > > WAN - 192.168.102.14/32 - * - x.x.x.189 - Lyra -> .189 > > So if I SSH into any of these boxes and launch $> lynx > http://www.whatismyip.com - each box reports the correct WAN IP I > require... so appears to be fine. > > However under pfSense - all the boxes report (using the same method above) > .190 - which is the firewall WAN IP > > Enable advanced outbound NAT - Ticked >
Config looks fine. Do you have any packages installed? --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
