You have change the Mask Bits, and you have to reconfigure direct net connecteds, your subnet range address is 10.10.200.1 - 10.10.203.254 /22 (255.255.252.0)
Just modify de range of DHCP service, and the hosts will get new IPs, Mask, Gw... Remember, You need to change all hosts that have static ip with new config to, subnet ips and mask. Alexandre Guimaraes LaRCom Laboratorio de Redes de Comunicacoes Departamento de Comunicacoes Faculdade de Engenharia Eletrica e Computacao Unicamp -----Mensagem original----- De: Atkins, Dwane P [mailto:[EMAIL PROTECTED] Enviada em: terca-feira, 26 de agosto de 2008 14:49 Para: [email protected] Assunto: [pfSense Support] DHCP services Recently, I added some IPs to our pfSense device. I made the change 10.10.202.0/23 and made it 10.10.202.0/22. BUT---when I went to change my DHCP service from 10.10.202.10 - 10.10.203.250 to 10.10.202.10 - 10.10.205.250, it said I was out of range and would that the available subnets were 10.10.200.0 - 10.10.203.0. How do I get it to dole out the DHCP address I want to dole out instead of the ones that were chosen for me? Thanks Dwane Dwane Atkins Senior Network Analyst IMS-System & Network Operations University of Texas Health Science Center at San Antonio Tel: 210-567-0158 http://ims.uthscsa.edu --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
