Is there a way that once a person has logged out of the Captive Portal, it will release the DHCP address?
Thanks -----Original Message----- From: Atkins, Dwane P [mailto:[EMAIL PROTECTED] Sent: Thursday, September 04, 2008 3:05 PM To: [email protected] Subject: RE: [pfSense Support] DHCP services Does anyone have a recommendation for the DHCP default lease time? We have a Captive Portal Idle Timeout of 30 minutes and a Hard timeout of 720 minutes. Our DHCP lease is 43300 seconds or a little more than 12 hours. We do want our students to log in a bunch of times, but we do not want them to keep an IP address for hours after they stop using it. We have been told to change make the default lease time more than our captive portal session. What would happen if we change the default lease time on the DHCP server to 7200 second and left the rest? How would this affect the users? Thanks Dwane -----Original Message----- From: Chris Buechler [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 26, 2008 4:09 PM To: [email protected] Subject: Re: [pfSense Support] DHCP services On Tue, Aug 26, 2008 at 2:08 PM, Atkins, Dwane P <[EMAIL PROTECTED]> wrote: > > Will I have to change all my routing to make these changes? I want to do > 202.0 - 205.250. > Hard to say, depends on how this is configured in other parts of your network. If you expect to use a /21, your interface has to be a part of that /21 network. You can't assign IPs that are out of the local subnet, which is what you were trying to do. If your entire internal network is private and everything outside that network is public you won't need to do anything but change your internal interface's subnet. If you have private IP space routed to you from other parts of your campus network and do not use NAT, you'll need to make sure the routing is configured appropriately on the WAN side network. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
