On Thu, Oct 02, 2008 at 03:43:15PM CEST, RB <[EMAIL PROTECTED]> said: > > Does this mean that rules with a gateway field to an inactive > > interfcae are simply ignored ? > > No, you set their gateway as your failover WAN connection. If you set > certain traffic to route through an individual gateway by IP, it will > not pass if that interface dies. Rather, you want to set up two WAN > failover groups, one primary->secondary and the other from > secondary->primary. Set rules for the traffic you want going out the > secondary with a gateway of 2ndto1st (or whatever you call it), and a > default rule with the gateway of 1stto2nd. > > There's a good MultiWAN document at > http://doc.pfsense.org/index.php/MultiWanVersion1.2 that explains all > this - highly recommend reading it before trying to solve > already-addressed problems. >
Thanks, I'll read before asking any other question. -- Erwan David ========================================================== Trusted Logic Tel: +33 1 30 97 25 03 5 rue du Bailliage Std: +33 1 30 97 25 00 78000 Versailles Fax: +33 1 30 97 25 19 France --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
