Hi all, thank you very much for all the helps I got. I downloaded the k_dflt-2.4.19-21.rpm file from the Thorsten's ftp site and the server has been stable for the last 2 days, and as I have tried to stress the network card as much as possible and it hasn't crashed, I am fairly confident it will fix the issue.
Thanks a lot again and keep up the good work. Bertrand. --- Joshua Uziel <[EMAIL PROTECTED]> wrote: > * Bertrand Sirodot <[EMAIL PROTECTED]> > [030224 08:58]: > > I have an Ultra2 server running Suse 7.3. The > Ultra2 > > has 3 HME cards, 1 on-board and 2 ESP-HME cards. > The > > server is used as an internet gateway for my home > > network. Everytime the HME card connected to the > > Internet is put under a bit of load, it pukes out > the > > following messages: > > Feb 22 12:05:18 mckinley kernel: eth0: Happy > Status > > 03030000 TX[000003ff:00000301] > > This is the first time I've heard of it affecting a > NIC on an Ultra 2. > I've only seen it (and heard of it) on the Ultra 1, > E models. (Non-E > models of the Ultra 1 have a 10Mbit lance ethernet > chip instead of an > hme). I'm guessing that eth0 is your onboard NIC... > it only affects the > onboard on the U1E (and maybe the U2 onboard as > well). > > > My question is that, although lots of people out > there > > seem to have the same issue, has anybody actually > > found a solution to this problem? > > Jorge Rivas already posted my one-liner patch. It > seems to fix the > problem for everyone that has tried it. Good luck. > __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
