swan  

Messages by Thread

• • Re: [Swan] KLIPS build failure on linux 4.6.2 Robert Hawkins
  • Re: [Swan] KLIPS build failure on linux 4.6.2 Paul Wouters
• [Swan] help needed with Libreswan (libreswan-3.15-5.3.el6.x86_64) and with libreswan-3.17-1.el6.x86_64 which went into a "stuck" or failed? state on 2.6.32-573.18.1.el6.x86_64 RHEL6 Li, Mike
  • Re: [Swan] help needed with Libreswan (libreswan-3.15-5.3.el6.x86_64) and with libreswan-3.17-1.el6.x86_64 which went into a "stuck" or failed? state on 2.6.32-573.18.1.el6.x86_64 RHEL6 Paul Wouters
  • Re: [Swan] help needed with Libreswan (libreswan-3.15-5.3.el6.x86_64) and with libreswan-3.17-1.el6.x86_64 which went into a "stuck" or failed? state on 2.6.32-573.18.1.el6.x86_64 RHEL6 Li, Mike
  • Re: [Swan] help needed with Libreswan (libreswan-3.15-5.3.el6.x86_64) and with libreswan-3.17-1.el6.x86_64 which went into a "stuck" or failed? state on 2.6.32-573.18.1.el6.x86_64 RHEL6 Paul Wouters
  • Re: [Swan] help needed with Libreswan (libreswan-3.15-5.3.el6.x86_64) and with libreswan-3.17-1.el6.x86_64 which went into a "stuck" or failed? state on 2.6.32-573.18.1.el6.x86_64 RHEL6 Li, Mike
  • Re: [Swan] help needed with Libreswan (libreswan-3.15-5.3.el6.x86_64) and with libreswan-3.17-1.el6.x86_64 which went into a "stuck" or failed? state on 2.6.32-573.18.1.el6.x86_64 RHEL6 Paul Wouters
  • Re: [Swan] help needed with Libreswan (libreswan-3.15-5.3.el6.x86_64) and with libreswan-3.17-1.el6.x86_64 which went into a "stuck" or failed? state on 2.6.32-573.18.1.el6.x86_64 RHEL6 Li, Mike
  • Re: [Swan] help needed with Libreswan (libreswan-3.15-5.3.el6.x86_64) and with libreswan-3.17-1.el6.x86_64 which went into a "stuck" or failed? state on 2.6.32-573.18.1.el6.x86_64 RHEL6 Li, Mike
  • Re: [Swan] help needed with Libreswan (libreswan-3.15-5.3.el6.x86_64) and with libreswan-3.17-1.el6.x86_64 which went into a "stuck" or failed? state on 2.6.32-573.18.1.el6.x86_64 RHEL6 Li, Mike
• [Swan] Site-to-site with public member addresses, routing trouble Jesse Butcher
  • Re: [Swan] Site-to-site with public member addresses, routing trouble Paul Wouters
  • Re: [Swan] Site-to-site with public member addresses, routing trouble Jesse Butcher
  • Re: [Swan] Site-to-site with public member addresses, routing trouble Paul Wouters
• [Swan] lower keysizemin possible for libreswan Frank
  • Re: [Swan] lower keysizemin possible for libreswan Paul Wouters
• [Swan] Multiple clients behind the same NAT IP get dropped - IPSec / xauth Schmidt, Michael M
  • Re: [Swan] Multiple clients behind the same NAT IP get dropped - IPSec / xauth Paul Wouters
  • Re: [Swan] Multiple clients behind the same NAT IP get dropped - IPSec / xauth Schmidt, Michael M
  • Re: [Swan] Multiple clients behind the same NAT IP get dropped - IPSec / xauth Tony Whyman
  • Re: [Swan] Multiple clients behind the same NAT IP get dropped - IPSec / xauth Paul Wouters
• [Swan] IKEv2 connection failure after ~1h Daniel J Blueman
  • Re: [Swan] IKEv2 connection failure after ~1h Paul Wouters
  • Re: [Swan] IKEv2 connection failure after ~1h Daniel J Blueman
• [Swan] libreswan 3.17 NAT-T fails in phase2 Ge Xu
  • Re: [Swan] libreswan 3.17 NAT-T fails in phase2 Paul Wouters
  • Re: [Swan] libreswan 3.17 NAT-T fails in phase2 Ge Xu
  • Re: [Swan] libreswan 3.17 NAT-T fails in phase2 Paul Wouters
  • Re: [Swan] libreswan 3.17 NAT-T fails in phase2 Ge Xu
  • Re: [Swan] libreswan 3.17 NAT-T fails in phase2 Paul Wouters
• Re: [Swan] IPSec+XAUTH Multiple Clients behind same NAT not working Antonio Silva
• [Swan] [PATCH, RFC] libreswan 3.17 incorrectly replying with dstport 500 during IKEv2 setup Daniel J Blueman
  • Re: [Swan] [PATCH, RFC] libreswan 3.17 incorrectly replying with dstport 500 during IKEv2 setup Paul Wouters
  • Re: [Swan] [PATCH, RFC] libreswan 3.17 incorrectly replying with dstport 500 during IKEv2 setup Daniel J Blueman
  • Re: [Swan] [PATCH, RFC] libreswan 3.17 incorrectly replying with dstport 500 during IKEv2 setup Antony Antony
  • Re: [Swan] [PATCH, RFC] libreswan 3.17 incorrectly replying with dstport 500 during IKEv2 setup Paul Wouters
  • Re: [Swan] [PATCH, RFC] libreswan 3.17 incorrectly replying with dstport 500 during IKEv2 setup Daniel J Blueman
• [Swan] What are strongest ciphers that can be used for ike and phase2alg? Michael Furman
  • Re: [Swan] What are strongest ciphers that can be used for ike and phase2alg? Paul Wouters
  • Re: [Swan] What are strongest ciphers that can be used for ike and phase2alg? Michael Furman
  • Re: [Swan] What are strongest ciphers that can be used for ike and phase2alg? Andrew Cagney
  • Re: [Swan] What are strongest ciphers that can be used for ike and phase2alg? Paul Wouters
• [Swan] vti support Charles Wyble
  • Re: [Swan] vti support Paul Wouters
  • Re: [Swan] vti support Charles Wyble
  • Re: [Swan] vti support Ruben Laban
  • Re: [Swan] vti support Charles Wyble
  • Re: [Swan] vti support Paul Wouters
  • Re: [Swan] vti support Charles Wyble
  • Re: [Swan] vti support Paul Wouters
  • Re: [Swan] vti support Roberto Suárez Soto
  • Re: [Swan] vti support Paul Wouters
  • [Swan] VTI support Xinwei Hong
  • Re: [Swan] VTI support Paul Wouters
  • Re: [Swan] VTI support Xinwei Hong
  • Re: [Swan] VTI support Paul Wouters
  • Re: [Swan] VTI support Xinwei Hong
  • Re: [Swan] VTI support Paul Wouters
  • Re: [Swan] VTI support Xinwei Hong
  • Re: [Swan] VTI support Paul Wouters
  • Re: [Swan] VTI support Xinwei Hong
  • Re: [Swan] VTI support Paul Wouters
• [Swan] Issue connecting between Cisco 2811 and Ubuntu 14.04 - worked with strongswan Charles Wyble
  • Re: [Swan] Issue connecting between Cisco 2811 and Ubuntu 14.04 - worked with strongswan Paul Wouters
  • Re: [Swan] Issue connecting between Cisco 2811 and Ubuntu 14.04 - worked with strongswan Charles Wyble
• [Swan] How to recognize an HTTP request that passes through the IPSec channel? Michael Furman
  • Re: [Swan] How to recognize an HTTP request that passes through the IPSec channel? Paul Wouters
  • Re: [Swan] How to recognize an HTTP request that passes through the IPSec channel? Lennart Sorensen
  • Re: [Swan] How to recognize an HTTP request that passes through the IPSec channel? Michael Furman
  • Re: [Swan] How to recognize an HTTP request that passes through the IPSec channel? Lennart Sorensen
  • Re: [Swan] How to recognize an HTTP request that passes through the IPSec channel? Paul Wouters
• [Swan] KLIPS pfkey_create kernel oops v3.17 Ofer Heifetz
  • Re: [Swan] KLIPS pfkey_create kernel oops v3.17 Paul Wouters
  • Re: [Swan] KLIPS pfkey_create kernel oops v3.17 Ofer Heifetz
  • Re: [Swan] KLIPS pfkey_create kernel oops v3.17 Paul Wouters
• [Swan] Is libreswan's OCSP periodically doing checks ? jonetsu
  • Re: [Swan] Is libreswan's OCSP periodically doing checks ? Paul Wouters
• [Swan] Windows IKEv2 Error 809 Tom Robinson
  • Re: [Swan] Windows IKEv2 Error 809 Paul Wouters
  • Re: [Swan] Windows IKEv2 Error 809 Tom Robinson
  • Re: [Swan] Windows IKEv2 Error 809 Tom Robinson
  • Re: [Swan] Windows IKEv2 Error 809 Tom Robinson
  • Re: [Swan] Windows IKEv2 Error 809 Paul Wouters
  • Re: [Swan] Windows IKEv2 Error 809 Tom Robinson
  • Re: [Swan] Windows IKEv2 Error 809 Tom Robinson
  • Re: [Swan] Windows IKEv2 Error 809 Tom Robinson
  • Re: [Swan] Windows IKEv2 Error 809 Paul Wouters
  • Re: [Swan] Windows IKEv2 Error 809 Paul Wouters
• [Swan] IPsec Multicast Tony Whyman
  • Re: [Swan] IPsec Multicast Paul Wouters
  • Re: [Swan] IPsec Multicast Tony Whyman
• [Swan] Libreswan developer meetups in Helsinki (June) and Berlin (July) Paul Wouters
• [Swan] Host-To-Host VPN with multiply interfaces Michael Furman
  • Re: [Swan] Host-To-Host VPN with multiply interfaces Paul Wouters
  • Re: [Swan] Host-To-Host VPN with multiply interfaces Michael Furman
  • Re: [Swan] Host-To-Host VPN with multiply interfaces Paul Wouters
  • Re: [Swan] Host-To-Host VPN with multiply interfaces Michael Furman
• [Swan] libreswan-3.18dr2 with ipsec0 VTI interface and NAT OE support Paul Wouters
  • Re: [Swan] libreswan-3.18dr2 with ipsec0 VTI interface and NAT OE support Muenz, Michael
  • Re: [Swan] libreswan-3.18dr2 with ipsec0 VTI interface and NAT OE support Muenz, Michael
  • Re: [Swan] libreswan-3.18dr2 with ipsec0 VTI interface and NAT OE support Paul Wouters
• [Swan] ipsec SA's up, no traffic routed? Frank
  • Re: [Swan] ipsec SA's up, no traffic routed? Nick Howitt
  • Re: [Swan] ipsec SA's up, no traffic routed? Paul Wouters
  • Re: [Swan] ipsec SA's up, no traffic routed? Frank
  • Re: [Swan] ipsec SA's up, no traffic routed? Nick Howitt
  • Re: [Swan] ipsec SA's up, no traffic routed? Frank
  • Re: [Swan] ipsec SA's up, no traffic routed? SOLVED Frank
  • Re: [Swan] ipsec SA's up, no traffic routed? SOLVED Paul Wouters
• [Swan] Centos7 Libreswan to cisco ipsec with sourceNAT? Frank
  • Re: [Swan] Centos7 Libreswan to cisco ipsec with sourceNAT? Nick Howitt
  • [Swan] Centos7 Libreswan to cisco ipsec with sourceNAT? Frank
• [Swan] L2TP/IPsec VPN client Amir Naftali
• [Swan] ipsec newhostkey / showhostkey does not work well in 3.17 Noam Singer
  • Re: [Swan] ipsec newhostkey / showhostkey does not work well in 3.17 Paul Wouters
• [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Sergio Belkin
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Paul Wouters
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Sergio Belkin
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Paul Wouters
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Sergio Belkin
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Paul Wouters
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Sergio Belkin
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Paul Wouters
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Sergio Belkin
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Sergio Belkin
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Paul Wouters
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Sergio Belkin
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Paul Wouters
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Sergio Belkin
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Paul Wouters
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Sergio Belkin
  • Re: [Swan] L2TP/IPsec with certificates: INVALID_KEY_INFORMATION Bob Miller
• Re: [Swan] Secure VPN Setup Kenny Herold
  • Re: [Swan] Secure VPN Setup Paul Wouters
  • Re: [Swan] Secure VPN Setup Kenny Herold
  • Re: [Swan] Secure VPN Setup Paul Wouters
• [Swan] No v3.17 tag at git ? Bentzy Sagiv
  • Re: [Swan] No v3.17 tag at git ? Tuomo Soini
  • Re: [Swan] No v3.17 tag at git ? Tuomo Soini
• [Swan] Is man2html a required package? Bentzy Sagiv
  • Re: [Swan] Is man2html a required package? Tuomo Soini
  • Re: [Swan] Is man2html a required package? Paul Wouters
• [Swan] 3.17 debian package Bentzy Sagiv
  • Re: [Swan] 3.17 debian package Paul Wouters
  • Re: [Swan] 3.17 debian package Bentzy Sagiv
• [Swan] [Swan-announce] libreswan 3.17 released - security release for CVE-2016-3071 The Libreswan Project
• [Swan] [Swan-announce] libreswan-3.17 released for CVE-2016-3017 IKEv2 aes_xcbc transform causes restart of IKE daemon (fwd) The Libreswan Project
• [Swan] no connection has been authorized with policy PSK+IKEV1_ALLOW Glenn Pierce
  • Re: [Swan] no connection has been authorized with policy PSK+IKEV1_ALLOW Paul Wouters
• [Swan] Host to subnet setup ? Glenn Pierce
  • Re: [Swan] Host to subnet setup ? Lennart Sorensen
• [Swan] IPSEC SA replace also replaces ISAKMP SA Marc Ledent
  • Re: [Swan] IPSEC SA replace also replaces ISAKMP SA Marc Ledent
  • Re: [Swan] IPSEC SA replace also replaces ISAKMP SA Paul Wouters
  • Re: [Swan] IPSEC SA replace also replaces ISAKMP SA Marc Ledent
• [Swan] IPsec/L2TP Subnet Restriction Chris Seguin
  • Re: [Swan] IPsec/L2TP Subnet Restriction Bob Miller
  • Re: [Swan] IPsec/L2TP Subnet Restriction Paul Wouters
  • Re: [Swan] IPsec/L2TP Subnet Restriction Chris Seguin
• [Swan] Pluto crashes - packet from <invalid>:24836: ABORT at /opt/src/libreswan-3.16/programs/pluto/ikev1_aggr.c:207 Srinivas Gudipudi
  • Re: [Swan] Pluto crashes - packet from <invalid>:24836: ABORT at /opt/src/libreswan-3.16/programs/pluto/ikev1_aggr.c:207 Srinivas Gudipudi
• [Swan] libreswan_3.16 seems broken in trusty Bentzy Sagiv
  • Re: [Swan] libreswan_3.16 seems broken in trusty Marc-Christian Petersen
  • Re: [Swan] libreswan_3.16 seems broken in trusty Paul Wouters
  • Re: [Swan] libreswan_3.16 seems broken in trusty Marc-Christian Petersen
  • Re: [Swan] libreswan_3.16 seems broken in trusty Paul Wouters
  • Re: [Swan] libreswan_3.16 seems broken in trusty Marc-Christian Petersen
  • Re: [Swan] libreswan_3.16 seems broken in trusty Paul Wouters
  • Re: [Swan] libreswan_3.16 seems broken in trusty Marc-Christian Petersen
  • Re: [Swan] libreswan_3.16 seems broken in trusty Paul Wouters
• [Swan] Wheezy and libreswan_3.16 Bentzy Sagiv
  • Re: [Swan] Wheezy and libreswan_3.16 Paul Wouters
  • Re: [Swan] Wheezy and libreswan_3.16 Marc-Christian Petersen
• [Swan] Phase 2 connection not being estbalished Srinivas Gudipudi
  • Re: [Swan] Phase 2 connection not being estbalished Paul Wouters
  • Re: [Swan] Phase 2 connection not being estbalished Srinivas Gudipudi
  • Re: [Swan] Phase 2 connection not being estbalished Srinivas Gudipudi
• Re: [Swan] NDcPP 1.0: FCS_IPSEC_EXT.1.12 Paul Wouters
• [Swan] ikev2 response dst port incorrect when request src port != 500 Fabian van der Werf
  • Re: [Swan] ikev2 response dst port incorrect when request src port != 500 Paul Wouters
• [Swan] CISCO AND AVAYA IP Phones Laison Computech Inc
• [Swan] Send lan traffic over established subnet - subnet tunnel Antonio Silva
  • Re: [Swan] Send lan traffic over established subnet - subnet tunnel Nick Howitt
  • Re: [Swan] Send lan traffic over established subnet - subnet tunnel Paul Wouters
• Re: [Swan] xl2tpd does not respond Bob Miller
  • Re: [Swan] xl2tpd does not respond Bob Miller
  • Re: [Swan] xl2tpd does not respond Paul Wouters
  • Re: [Swan] xl2tpd does not respond Paul Wouters
  • Re: [Swan] xl2tpd does not respond Bob Miller
• Re: [Swan] [libreswan] Mac OS IKEv2 missing payload(s) (ISAKMP_NEXT_v2AUTH) (#47) Paul Wouters
• [Swan] klips_error:ipsec_xmit_encap_init Erik Andersson
  • Re: [Swan] klips_error:ipsec_xmit_encap_init Paul Wouters
  • Re: [Swan] klips_error:ipsec_xmit_encap_init Erik Andersson
• Re: [Swan] Adding host to subnet VPN Paul Wouters
  • Re: [Swan] Adding host to subnet VPN Tuomo Soini
  • Re: [Swan] Adding host to subnet VPN Alex
  • Re: [Swan] Adding host to subnet VPN Paul Wouters
  • Re: [Swan] Adding host to subnet VPN Alex
  • Re: [Swan] Adding host to subnet VPN Paul Wouters

• Later messages