Has the new 0.3.2 version recently released the fix for the bad compiling problem? (cannot find konnector).
I tried and it just fails... Thanks! El Miércoles, 15 de Febrero de 2006 20:11, Volker Christian escribió: > Hi marc, Hi Nabil, > > On Wednesday 15 February 2006 18:08, Marc wrote: > > Hi Nabil, > > > > > > Thank for your reply, and for the indications. I will try to elaborate a > > typical address book and agenda for testing... for the time being, I sent > > you a very preliminary version, which points out a few problems. > > > > Note that before the synchronisation, I did a complete reset of the pda, > > and removed all configurations files from raki and others. I did first an > > empty synchronisation, then and added contacts and events. > > > > The problems are: out of the 7 contacts of the address book, only the > > two most simple appeared on the pda. I guess this is correlated to the > > following: in the .vcf file, each of the problematic contacts had a field > > longer than one line. > > Confirmed. > > > About the agenda, which contains three events, the one concerning a > > whole day did not appeared on the pda (because of the note ?). However, > > as can be seen on the ics attached file, it did came back to the desktop > > side (without appearing in Kontact), being modified in the following way: > > - the UID has been changed to RRA-ID-01001875 > > - the "summary field" has been changed to the first line of the note > > - probably more modifications > > Confirmed. > > > The two others events were transmitted fine, but after a few > > synchronisations they were duplicated and came back with one hour time > > lag. I did not experienced the problem of the pda freezing, which > > appeared with my real data. > > > > I would like also to mention some details about the installation > > process: 1) I installed synce-serial-0.9.1, but it would not work until I > > configure it with the explicit --prefix=/usr option (else, it could not > > find synce-serial-chat) > > 2) I had to install rra previously to synce-kde > > Thats obvious, as SynCE-KDE depends on rra! > > > 3) I ran into some trouble (as every time before) at the moment of > > compiling syncekonnector: even if kabc, multisynk, etc are installed on > > my system > > > > (OpenSuse 10.0), the ./configure script could not find them: > > > checking for main in -lkabc_file... no > > > checking for main in -lkonnector... no > > > configure: error: Can't find libkonnector.so > > Please could you send me the config.log file of a unseccessful ./configure > run without your applied hack? I will try to fix it. > > > The trick I used at that time was to replace, into the configure script, > > the lines > > > > > ac_cv_lib_kabc_file_main=no > > > > with > > > > > ac_cv_lib_kabc_file_main=yes > > > > and etc for konnector, ksync, multisynk... but I guess this is not the > > appropriate solution. However, I had no problem during the compilation > > process. > > No, thats not the appropriate solution as syncekonnector has to check > whether those libraries exist or not as it depends essentially on them. > > regards > voc > > > That's all for today, I hope it helps. Tell me about your preferences > > regarding the way of testing the konnector, probably it can be fitted > > better to your needs. > > > > Regards, > > > > Marc > > > > Le Lundi 13 Février 2006 15:21, vous avez écrit : > > > Am Montag, 13. Februar 2006 12:06 schrieb Marc: > > > > Hi, > > > > > > > > > > > > I discovered your projet a few weeks ago... No need to say that > > > > it > > > > is already very useful to me, since I use my iPAQ almost only for its > > > > agenda functionality. Nevertheless, I noticed several problems with > > > > the synchronisation, and I would like to know whether I could help on > > > > the testing side. > > > > > > Help is always welcome. > > > Please use the latest cvs, to make sure the problems aren't already > > > fixed: > > > > > > cvs -z3 -d:pserver:[EMAIL PROTECTED]:/cvsroot/synce co -P > > > libsynce librapi2 dynamite unshield orange synce-kde syncekonnector rra > > > > > > It should be compiled in that order. Each module can be build with: > > > ./bootstrap > > > ./configure --enable-debug=full > > > make install > > > > > > Make sure, that /usr/local/kde/lib is listed in your /etc/ld.so.conf > > > run `ldconfig` after installation > > > run `find /usr/local/kde -iname *.desktop` and copy or symlink these > > > files to their corresponding kde directories of your distribution. > > > > > > > - several contacts are missing (something like 30 out of 300) on the > > > > pda side after synchronisation. > > > > > > When you build rra, it will build commandline tools for debugging in > > > rra/src, too. > > > Please use these to dump the contacts in question and send them to the > > > list (if the data isn't secret) > > > > > > > - the contact notes are missing > > > > > > It's not yet implemented, but someone posted a patch lately, however > > > it's untested: > > > http://www.mail-archive.com/synce-devel%40lists.sourceforge.net/msg0010 > > >6. ht ml > > > > > > > - the organisation of a contact created on the pda comes along with a > > > > semicolon in Kontact > > > > > > Yup, this is a known problem too, but more a political. IIRC the > > > problem is the definition of organizational units by the various PIMs. > > > > > > rgds > > ------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. Do you grep through log > files for problems? Stop! Download the new AJAX search engine that makes > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642 > _______________________________________________ > Synce-devel mailing list > Synce-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/synce-devel ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642 _______________________________________________ Synce-devel mailing list Synce-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synce-devel
