Hi Folks,
things are looking better, but not good yet!
got most of the packages installed smoothly with synaptics (and
aptitude) ;-)
However, there is an issue with the usb-rndis package. Apparently it
can't reach the lauch pad packages since it just lists the 0.10 version.
So I tried building the packages myself. Supprisingly it
worked !( thanks Johnny!). But still no connection.
I started odccm (as root) but it didn't connect. running pls gives me:
[EMAIL PROTECTED]:~$ pls
pls: symbol lookup error: pls: undefined symbol: rapi_connection_from_name
This point to the python version issue.. right?
Also, I'm a bit confused about the usb-rndis vs. usb-rndis-lite issue. I
thought that the lite-version is the more up-to-date version but we're
using the other-version?
How many of my problems could be caused by to failed installtion /
unclean removals? I tried to removed everything I thought was related
to sycne an started from scratch, but you never know where some filed hides...
Cheers,
achim
Am Freitag, den 15.02.2008, 10:25 +0000 schrieb Mark Ellis:
> On Thu, 2008-02-14 at 21:39 +0000, John Carr wrote:
> > On Thu, Feb 14, 2008 at 9:21 PM, Achim Zirner <[EMAIL PROTECTED]> wrote:
> > > Hi,
> > >
> > > Now that John created packages for Debian I'd like to give it a go
> > > (again). Runnning Ubuntu 7.10 I used git-clone to get the repositories
> > > and now .....? I thought that I could build a deb-package with
> > > dpkg-buildpackage -rfakeroot -b
> > >
> > > And then just install it.
> > >
> > > However, I get messages such as:
> > >
> > > [EMAIL PROTECTED]:~/s5/synce-sync-engine$ ls
> > > debian
> > > [EMAIL PROTECTED]:~/s5/synce-sync-engine$ dpkg-buildpackage -rfakeroot
> > > -b
> > > dpkg-buildpackage: source package is synce-sync-engine
> > > dpkg-buildpackage: source version is 0.11-1
> > > dpkg-buildpackage: source changed by Jonny Lamb
> > > <[EMAIL PROTECTED]>
> > > dpkg-buildpackage: host architecture i386
> > > dpkg-buildpackage: source version without epoch 0.11-1
> > > fakeroot debian/rules clean
> > > test -x debian/rules
> > > test "`id -u`" = 0
> > > dh_clean
> > > cd . && python setup.py clean -a
> > > python: can't open file 'setup.py': [Errno 2] No such file or directory
> > > make: [python-clean-2.5] Fehler 2 (ignoriert)
> > > rm -f python-build-stamp-*
> > > find . -name '*.pyc' -exec rm '{}' ';'
> > > rm -rf SyncEngine.egg-info
> > > debian/rules build
> > > test -x debian/rules
> > > mkdir -p "."
> > > cd . && python setup.py build
> > > --build-base="/home/achim/s5/synce-sync-engine/./build"
> > > python: can't open file 'setup.py': [Errno 2] No such file or directory
> > > make: *** [python-build-stamp-2.5] Fehler 2
> > > [EMAIL PROTECTED]:~/s5/synce-sync-engine$
> > >
> > >
> > > I'm not that knowledgeable about compiling, but I thought that the usual
> > > way:
> > > ./confiure
> > > make
> > > sudo make install
> > >
> > > would also work, ut thee is no "make-file"
> > >
> > > It seems there is a different way doing things or am I missing
> > > something?
> > >
>
> Wild guess, have you put the debian directory in the unpacked source ?
> Jonny's stuff is only the build architecture, it doesn't actually
> include the source.
>
> > > There was an issue about dependency with python: python_rapi2 depends
> > > on python < 2.5 which causes problems with ubuntu where python 2.5 ist
> > > standard. I believe Mark was working on this. Right?
> > > Is there any news on this?
> > >
>
> Jonny got this fixed. If you build with his debian dirs in git, it
> should use the python versions available on your distro. Note it will
> build for all available versions, so if ubuntu supports other versions
> than 2.5, you may have to install them as well.
>
> > Hi
> >
> > I've published Ubuntu Feisty, Gutsy and Hardy versions of Jonnylambs
> > packages in a Launchpad PPA. The PPA is at:
> >
> > https://launchpad.net/~synce/+archive
> >
> > I also started updating the wiki page "SynceWithUbuntu" to match the
> > updated packages:
> >
> > http://www.synce.org/moin/SynceWithUbuntu
> >
> > These notes aren't considered "production ready" so they aren't linked
> > to from the main page, but should get you going.
> >
> > John
> >
>
> Or you could just use John's, which is probably easier :)
>
> Mark
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> SynCE-Devel mailing list
> SynCE-Devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/synce-devel
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
SynCE-Devel mailing list
SynCE-Devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/synce-devel
