> On Mon, 2009-06-22 at 22:10 +0200, David Eriksson wrote: >> On Wed, 2009-06-17 at 18:07 -0700, Captain Fourier wrote: >> > Hey, >> > >> > I have been trying to get CeRapiInvoke to work. Just using the unit >> > tests in the release. All I get is -2147467263 as a return result. >> >> 0x80004001 means "not implemented" >> >> > Is CeRapiInvoke implemented? Is it still only Stream mode? >> >> UTSL :-) >> >> Unfortunately it has not been implemented for Windows Mobile 5 or newer >> devices. Any takers on the synce-devel list? >> >> >> > Thanks for your time, >> > Rob >> >> >> Best regards, >> >> David Eriksson, http://www.divideandconquer.se/ >> > > Rob, I'll take a look at this sometime, but my time is very limited at > the moment, so I'll need three things, the dll you're using on the > device and the code you're using to call it, and the command code for > CeRapiInvoke on WM5 :) I don't have anything set up to generate the call > on Windows to capture that code, so someone will have to find it for me.
The more I think about this, the more I suspect that the CeRapiInvoke on WM5 is more complicated than knowing the command code and that's why the command code is not documented in https://synce.svn.sourceforge.net/svnroot/synce/trunk/librapi2/src/rapi2/README. I would need a few reverse engineering hours to confirm this though... Cheers, David, http://www.divideandconquer.se/ ------------------------------------------------------------------------------ _______________________________________________ SynCE-Devel mailing list SynCE-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synce-devel
