I'm calling
hr = CeRapiInvoke("\\invokeme.dll", "PingBuffer", PING_BUFFER_SIZE, buffer,
&output_size, &output_buffer, NULL, 0);with PING_BUFFER_SIZE = 10 I've attached the wireshark pcap. Ignore everything before 12 seconds. I called the identical invoke 3 times on the device. buffer should be 10 0xDD's. output_buffer and output_size were uninitialized and when finished output_buffer is identical to buffer and output_size is 10 (PING_BUFFER_SIZE). I'm not sending this to hand it off to you guys. I'm still looking at this myself to see if I can implement it or figure out the command code, but I'm sure the people on this list have more experience doing this. Let me know if you have any questions or want me to redo with some changes. -David Richardson On Thu, Jun 25, 2009 at 3:44 AM, Mark Ellis <m...@mpellis.org.uk> wrote: > On Thu, 2009-06-25 at 00:39 +0200, David Richardson wrote: > > > > > > On Wed, Jun 24, 2009 at 12:35 AM, Mark Ellis <m...@mpellis.org.uk> > > wrote: > > On Mon, 2009-06-22 at 22:10 +0200, David Eriksson wrote: > > > On Wed, 2009-06-17 at 18:07 -0700, Captain Fourier wrote: > > > > Hey, > > > > > > > > I have been trying to get CeRapiInvoke to work. Just using > > the unit > > > > tests in the release. All I get is -2147467263 as a return > > result. > > > > > > 0x80004001 means "not implemented" > > > > > > > Is CeRapiInvoke implemented? Is it still only Stream mode? > > > > > > UTSL :-) > > > > > > Unfortunately it has not been implemented for Windows Mobile > > 5 or newer > > > devices. Any takers on the synce-devel list? > > > > > > > > > > Thanks for your time, > > > > Rob > > > > > > > > > Best regards, > > > > > > David Eriksson, http://www.divideandconquer.se/ > > > > > > > > > Rob, I'll take a look at this sometime, but my time is very > > limited at > > the moment, so I'll need three things, the dll you're using on > > the > > device and the code you're using to call it, and the command > > code for > > CeRapiInvoke on WM5 :) > > > > I believe Rob was trying to execute the test located at > > > http://synce.svn.sourceforge.net/viewvc/synce/trunk/librapi2/tests/CeRapiInvoke/which > has a DLL with it. > > > > Ah yes, I've never noticed that there ! > > > If someone can briefly explain how I would go about getting the > > command code for CeRapiInvoke on WM5, I have the necessary hardware > > and time. > > Theoretically, run a small program on a windows host that just > RapiInit's and calls the command we're interested in, and capture the > transmission on the network interface using eg. wireshark. > > Of course, being MS it's rarely that straightforward, and if David is > correct it could be a lot more complex. However, if you could use the > test prog for CeRapiInvoke from windows and capture everything over the > interface, we might be fortunate. > > > > > I don't have anything set up to generate the call > > on Windows to capture that code, so someone will have to find > > it for me. > > > > Mark > > > > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > > SynCE-Devel mailing list > > SynCE-Devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/synce-devel > > > > >
cerapiinvoke2.pcap
Description: Binary data
------------------------------------------------------------------------------
_______________________________________________ SynCE-Devel mailing list SynCE-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synce-devel
