Hi! I would like to remove both "Default opacity" and "Default Blend Method" widgets. K.
2014-02-20 22:46 GMT+07:00 Dave Jeffery <david.richard.jeff...@gmail.com>: > HI Yu! > > I have never used the Opacity preference before - it's always 1.0 when I use > Synfig Studio. I can't imagine I would ever set it to any other value than > 1.0 and I wouldn't mind if this preference was not exposed on the UI. > > Unifying terms is a hard question. Amount is only opacity when it's set > between 0 and 1.0 ; it can be set to values less than 0 and more than 1 and > when used with certain layers make a difference other than opacity (for > instance brightness). I have sometimes used values of Amount more than 1 in > order to get certain effects. > > Obviously Carlos and Konstantin will know far more about this than me, but I > hope this is helpful. > > All the best, > > Dave > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk > _______________________________________________ > Synfig-devl mailing list > Synfig-devl@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/synfig-devl > -- http://morevnaproject.org/ ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk _______________________________________________ Synfig-devl mailing list Synfig-devl@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synfig-devl
