Please find it attached. I hope it helps. cheers, Ingmar
René Rebe wrote: > Can you send me the write log file of the failed groff build: > > src.groff. ... fl_wrapper.wlog > > to get an idea what program created the /root/.history? > > Ingmar Schraub wrote: >> Thanks a lot. I had disabled that package for now and the build is >> continuing. >> >> I noticed also that 'popt' wants 'gettext' first, but it wasn't built >> first. So I built it manually with ./scripts/Build-Pkg gettext and ran >> ./scripts/Build-Target again. That worked. >> >> regards, >> >> Ingmar >> >> René Rebe wrote: >> >>> Hi again, >>> >>> René Rebe wrote: >>> >>>> I think I do not see the offending file in the shortened log, >>>> >>> Heh it's the .history, I only looked at the #base lines: >>> >>> !> Created file outside basedir: /root/.history >>> !> base #1: /home/ingmar/dev/t2-trunk >>> !> base #2: >>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64 >>> >>> I'll take a look, now :-) >>> >>> >>>> but I guess some tch or so history file in the /root directory? >>>> >>>> I saw this recently, too but was too lazy to patch the configure >>>> script immediatly. >>>> >>>> Can take a look in some other minute. >>>> >>>> Ingmar Schraub wrote: >>>> >>>>> Hi René, >>>>> >>>>> that's a very fast fix! Impressive!! I tried and it worked just fine. >>>>> Unfortunately I ran into the next issue: >>>>> >>>>> groff fails with >>>>> >>>>> == 16:39:31 =[1]=> Building archiver/tar [1.22 8.0-trunk]. >>>>> -> Parallel build using 2 jobs enabled. >>>>> -> Reading package config: package/archiver/tar/tar.conf >>>>> -> Preparing build in src.tar.default.20090318.163930.25665.nexoc >>>>> -> Building. Writing output to $root/var/adm/logs/1-tar.out >>>>> -> $root/var/adm/logs/1-tar.out -> 1-tar.log >>>>> == 03/18/09 16:40:46 =[1]=> Finished building package tar. >>>>> >>>>> == 16:40:47 =[1]=> Building base/groff [1.20.1 8.0-trunk]. >>>>> -> Reading package config: package/base/groff/groff.conf >>>>> -> Preparing build in src.groff.default.20090318.164046.8468.nexoc >>>>> -> Building. Writing output to $root/var/adm/logs/1-groff.out >>>>> !> ==[build_this_package:992 (last $?=0)> '[' ' >>>>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64/usr/doc/groff' >>>>> >>>>> >>>>> ']' >>>>> !> ==[build_this_package:993 (last $?=0)> rmdir >>>>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64/usr/doc/groff >>>>> >>>>> >>>>> !> ==[build_this_package:996 (last $?=0)> return 0 >>>>> !> =[:609 (last $?=0)> set +o xtrace >>>>> !> Creating file list and doing final adaptions ... >>>>> !> Created file outside basedir: /root/.history >>>>> !> base #1: /home/ingmar/dev/t2-trunk >>>>> !> base #2: >>>>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64 >>>>> !> removed >>>>> `/home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64/var/adm/logs/1-groff.log' >>>>> >>>>> >>>>> -> $root/var/adm/logs/1-groff.out -> 1-groff.err >>>>> == 03/18/09 16:42:17 =[1]=> Aborted building package groff. >>>>> >>>>> What's wrong here? >>>>> >>>>> regards, >>>>> >>>>> Ingmar >>>>> >>>>> René Rebe wrote: >>>>> >>>>> >>>>>> Hi, >>>>>> >>>>>> Committed revision 32648. >>>>>> >>>>>> Yours, >>>>>> >>>>>> Ingmar Schraub wrote: >>>>>> >>>>>>> Thanks a lot René! >>>>>>> >>>>>>> Apparently I had overlooked the 'contact' section on your website . >>>>>>> Sorry >>>>>>> for that. >>>>>>> >>>>>>> My trunk checkout is 'current' >>>>>>> >>>>>>> Path: . >>>>>>> URL: http://svn.exactcode.de/t2/trunk >>>>>>> Repository Root: http://svn.exactcode.de/t2 >>>>>>> Repository UUID: c5f82cb5-29bc-0310-9cd0-bff59a50e3bc >>>>>>> Revision: 32647 >>>>>>> Node Kind: directory >>>>>>> Schedule: normal >>>>>>> Last Changed Author: rene >>>>>>> Last Changed Rev: 32647 >>>>>>> Last Changed Date: 2009-03-18 15:55:58 +0100 (Wed, 18 Mar 2009) >>>>>>> >>>>>>> tar does not build with my settings (target x86_64, glibc). >>>>>>> >>>>>>> Here we go again: >>>>>>> Found 7 new/updated files in source tree: >>>>>>> -> Found new/updated file: >>>>>>> package/gnome2/gnome-python/gnome-python.desc >>>>>>> -> Found new/updated file: >>>>>>> package/gnome2/gnome-nettool/gnome-nettool.desc >>>>>>> -> Found new/updated file: package/gnome2/librsvg/librsvg.desc >>>>>>> -> ** list truncated to save space on the terminal ** >>>>>>> >>>>>>> Re-running configuration: >>>>>>> -> Aquiring config write lock (may take until other configs >>>>>>> finished) ... >>>>>>> -> T2 8.0-trunk configuration ... >>>>>>> -> Building src/luabash.so. >>>>>>> -> INSTALL DYNLIB >>>>>>> /home/ingmar/dev/t2-trunk/src/Linux-x86_64/bash/luabash.so >>>>>>> -> LUA accelerator (C) 2006 by Valentin Ziegler & Rene Rebe, >>>>>>> ExactCODE >>>>>>> -> New config written to config/default/*. >>>>>>> -> Cleaning up. Configuration finished. >>>>>>> >>>>>>> Building tools in build/.../TOOLCHAIN/tools.cross: >>>>>>> -> Building tools.cross/wrapper/cmd_wrapper. >>>>>>> -> Building tools.cross/wrapper/strip_wrapper. >>>>>>> -> Building tools.cross/wrapper/{uname,arch}. >>>>>>> -> Building tools.cross/wrapper/install_wrapper. >>>>>>> -> Building tools.cross/bin/getdu. >>>>>>> -> Building tools.cross/bin/getfiles. >>>>>>> -> Building tools.cross/bin/fl_wrparse. >>>>>>> -> Building tools.cross/bin/fl_stparse. >>>>>>> -> Building tools.cross/lib/fl_wrapper.so. >>>>>>> -> Testing tools.cross/lib/fl_wrapper.so. >>>>>>> -> Creating tools.cross/lib/parse-config. >>>>>>> -> Creating tools.cross/lib/pkg_*_{pre,post}.conf >>>>>>> >>>>>>> Removing old error logs ... >>>>>>> -> Removing var/adm/logs/1-tar.err ... >>>>>>> >>>>>>> == 16:15:10 =[1]=> Building archiver/tar [1.22 8.0-trunk] . >>>>>>> -> Parallel build using 2 jobs enabled. >>>>>>> -> Reading package config: package/archiver/tar/tar.conf >>>>>>> -> Preparing build in src.tar.default.20090318.161509.1096.nexoc >>>>>>> -> Building. Writing output to $root/var/adm/logs/1-tar.out >>>>>>> !> checking whether program_invocation_name is declared... yes >>>>>>> !> checking whether program_invocation_short_name is declared... yes >>>>>>> !> checking whether program_invocation_name is defined... yes >>>>>>> !> checking whether program_invocation_short_name is defined... yes >>>>>>> !> checking whether btowc(EOF) is correct... configure: error: >>>>>>> cannot >>>>>>> run test program while cross compiling >>>>>>> !> See `config.log' for more details. >>>>>>> !> Due to previous errors, no 1-tar.log file! >>>>>>> !> (Try enabling xtrace in the config to track an error inside the >>>>>>> build >>>>>>> system.) >>>>>>> -> $root/var/adm/logs/1-tar.out -> 1-tar.err >>>>>>> == 03/18/09 16:15:49 =[1]=> Aborted building package tar. >>>>>>> -> Unmounting loop mounts ... >>>>>>> >>>>>>> >>>>>>> Do you have any ideas/pointers? >>>>>>> >>>>>>> Thanks and kind regards, >>>>>>> >>>>>>> Ingmar >>>>>>> >>>>>>> >>>>>>> René Rebe wrote: >>>>>>> >>>>>>> >>>>>>>> Dear Ingmar, >>>>>>>> >>>>>>>> welcome in the T2 world. >>>>>>>> >>>>>>>> http://t2-project.org/contact/ >>>>>>>> >>>>>>>> Please try to post to the list in the future, as it potentially >>>>>>>> allows other people to comment as well (and I already >>>>>>>> nearly forgot about the mail in my populated inbox). >>>>>>>> >>>>>>>> How old is your trunk checkout (svn info)? A quick >>>>>>>> test build looks good for ARM / uclibc: >>>>>>>> >>>>>>>> == 03/18/09 16:15:16 =[1]=> Finished building package tar. >>>>>>>> >>>>>>>> Ingmar Schraub wrote: >>>>>>>> >>>>>>>>> Hallo, >>>>>>>>> >>>>>>>>> ich habe gestern meinen ersten Versuch mit t2 gestartet. Bislang >>>>>>>>> habe >>>>>>>>> ich viel mit buildroot/uClibc gearbeitet. >>>>>>>>> >>>>>>>>> Nun bin ich auf ein Problem gestossen und weiss hier leider (als >>>>>>>>> Neuling) nicht weiter. Das package 'tar' lässt sich nicht >>>>>>>>> übersetzen. >>>>>>>>> S.u. >>>>>>>>> >>>>>>>>> Als Target habe ich x86_64 mit glibc gewählt. Als build-host >>>>>>>>> verwende >>>>>>>>> ich ein 64-Bit Suse 11 Linux. >>>>>>>>> >>>>>>>>> Was kann ich tun, um das Problem zu beheben? >>>>>>>>> >>>>>>>>> Sorry, dass ich Sie direkt anschreibe, habe auf der Homepage nach >>>>>>>>> einem >>>>>>>>> Link für eine Mailingliste gesucht, aber hab ihn leider nicht >>>>>>>>> gefunden... >>>>>>>>> >>>>>>>>> Wäre prima, wenn Sie mir irgendwie weiterhelfen könnten. >>>>>>>>> >>>>>>>>> == 09:42:36 =[1]=> Building archiver/tar [1.22 8.0-trunk]. >>>>>>>>> -> Parallel build using 2 jobs enabled. >>>>>>>>> -> Reading package config: package/archiver/tar/tar.conf >>>>>>>>> -> Preparing build in src.tar.default.20090318.094235.8777.nexoc >>>>>>>>> -> Building. Writing output to $root/var/adm/logs/1-tar.out >>>>>>>>> !> checking whether program_invocation_name is declared... yes >>>>>>>>> !> checking whether program_invocation_short_name is >>>>>>>>> declared... yes >>>>>>>>> !> checking whether program_invocation_name is defined... yes >>>>>>>>> !> checking whether program_invocation_short_name is defined... >>>>>>>>> yes >>>>>>>>> !> checking whether btowc(EOF) is correct... configure: error: >>>>>>>>> cannot >>>>>>>>> run test program while cross compiling >>>>>>>>> !> See `config.log' for more details. >>>>>>>>> !> Due to previous errors, no 1-tar.log file! >>>>>>>>> !> (Try enabling xtrace in the config to track an error inside the >>>>>>>>> build >>>>>>>>> system.) >>>>>>>>> -> $root/var/adm/logs/1-tar.out -> 1-tar.err >>>>>>>>> == 03/18/09 09:43:27 =[1]=> Aborted building package tar. >>>>>>>>> -> Unmounting loop mounts ... >>>>>>>>> >>>>>>>>> Vielen Dank im voraus und viele Grüsse >>>>>>>>> >>>>>>>>> Ingmar Schraub >>>>>>>>> >>>> >>> > >
fl_wrapper.wlog.gz
Description: GNU Zip compressed data
----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to [email protected] with a subject of: unsubscribe t2
