Here you go. Thanks, Ingmar
René Rebe wrote: > Yes, it helped, so it's csh (though we patch that away already, > strange). > > Can you also send me the build/.../var/adm/logs/1-groff.err? > > Ingmar Schraub wrote: >> Please find it attached. I hope it helps. >> >> cheers, Ingmar >> >> René Rebe wrote: >> >>> Can you send me the write log file of the failed groff build: >>> >>> src.groff. ... fl_wrapper.wlog >>> >>> to get an idea what program created the /root/.history? >>> >>> Ingmar Schraub wrote: >>> >>>> Thanks a lot. I had disabled that package for now and the build is >>>> continuing. >>>> >>>> I noticed also that 'popt' wants 'gettext' first, but it wasn't built >>>> first. So I built it manually with ./scripts/Build-Pkg gettext and ran >>>> ./scripts/Build-Target again. That worked. >>>> >>>> regards, >>>> >>>> Ingmar >>>> >>>> René Rebe wrote: >>>> >>>> >>>>> Hi again, >>>>> >>>>> René Rebe wrote: >>>>> >>>>>> I think I do not see the offending file in the shortened log, >>>>>> >>>>> Heh it's the .history, I only looked at the #base lines: >>>>> >>>>> !> Created file outside basedir: /root/.history >>>>> !> base #1: /home/ingmar/dev/t2-trunk >>>>> !> base #2: >>>>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64 >>>>> >>>>> I'll take a look, now :-) >>>>> >>>>> >>>>>> but I guess some tch or so history file in the /root directory? >>>>>> >>>>>> I saw this recently, too but was too lazy to patch the configure >>>>>> script immediatly. >>>>>> >>>>>> Can take a look in some other minute. >>>>>> >>>>>> Ingmar Schraub wrote: >>>>>> >>>>>>> Hi René, >>>>>>> >>>>>>> that's a very fast fix! Impressive!! I tried and it worked just >>>>>>> fine. >>>>>>> Unfortunately I ran into the next issue: >>>>>>> >>>>>>> groff fails with >>>>>>> >>>>>>> == 16:39:31 =[1]=> Building archiver/tar [1.22 8.0-trunk] . >>>>>>> -> Parallel build using 2 jobs enabled. >>>>>>> -> Reading package config: package/archiver/tar/tar.conf >>>>>>> -> Preparing build in src.tar.default.20090318.163930.25665.nexoc >>>>>>> -> Building. Writing output to $root/var/adm/logs/1-tar.out >>>>>>> -> $root/var/adm/logs/1-tar.out -> 1-tar.log >>>>>>> == 03/18/09 16:40:46 =[1]=> Finished building package tar . >>>>>>> >>>>>>> == 16:40:47 =[1]=> Building base/groff [1.20.1 8.0-trunk] . >>>>>>> -> Reading package config: package/base/groff/groff.conf >>>>>>> -> Preparing build in src.groff.default.20090318.164046.8468.nexoc >>>>>>> -> Building. Writing output to $root/var/adm/logs/1-groff.out >>>>>>> !> ==[build_this_package:992 (last $?=0)> '[' ' >>>>>>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64/usr/doc/groff' >>>>>>> >>>>>>> >>>>>>> >>>>>>> ']' >>>>>>> !> ==[build_this_package:993 (last $?=0)> rmdir >>>>>>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64/usr/doc/groff >>>>>>> >>>>>>> >>>>>>> >>>>>>> !> ==[build_this_package:996 (last $?=0)> return 0 >>>>>>> !> =[:609 (last $?=0)> set +o xtrace >>>>>>> !> Creating file list and doing final adaptions ... >>>>>>> !> Created file outside basedir: /root/.history >>>>>>> !> base #1: /home/ingmar/dev/t2-trunk >>>>>>> !> base #2: >>>>>>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64 >>>>>>> !> removed >>>>>>> `/home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64/var/adm/logs/1-groff.log' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -> $root/var/adm/logs/1-groff.out -> 1-groff.err >>>>>>> == 03/18/09 16:42:17 =[1]=> Aborted building package groff. >>>>>>> >>>>>>> What's wrong here? >>>>>>> >>>>>>> regards, >>>>>>> >>>>>>> Ingmar >>>>>>> >>>>>>> René Rebe wrote: >>>>>>> >>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> Committed revision 32648. >>>>>>>> >>>>>>>> Yours, >>>>>>>> >>>>>>>> Ingmar Schraub wrote: >>>>>>>> >>>>>>>>> Thanks a lot René! >>>>>>>>> >>>>>>>>> Apparently I had overlooked the 'contact' section on your website. >>>>>>>>> Sorry >>>>>>>>> for that. >>>>>>>>> >>>>>>>>> My trunk checkout is 'current' >>>>>>>>> >>>>>>>>> Path: . >>>>>>>>> URL: http://svn.exactcode.de/t2/trunk >>>>>>>>> Repository Root: http://svn.exactcode.de/t2 >>>>>>>>> Repository UUID: c5f82cb5-29bc-0310-9cd0-bff59a50e3bc >>>>>>>>> Revision: 32647 >>>>>>>>> Node Kind: directory >>>>>>>>> Schedule: normal >>>>>>>>> Last Changed Author: rene >>>>>>>>> Last Changed Rev: 32647 >>>>>>>>> Last Changed Date: 2009-03-18 15:55:58 +0100 (Wed, 18 Mar 2009) >>>>>>>>> >>>>>>>>> tar does not build with my settings (target x86_64, glibc). >>>>>>>>> >>>>>>>>> Here we go again: >>>>>>>>> Found 7 new/updated files in source tree: >>>>>>>>> -> Found new/updated file: >>>>>>>>> package/gnome2/gnome-python/gnome-python.desc >>>>>>>>> -> Found new/updated file: >>>>>>>>> package/gnome2/gnome-nettool/gnome-nettool.desc >>>>>>>>> -> Found new/updated file: package/gnome2/librsvg/librsvg.desc >>>>>>>>> -> ** list truncated to save space on the terminal ** >>>>>>>>> >>>>>>>>> Re-running configuration: >>>>>>>>> -> Aquiring config write lock (may take until other configs >>>>>>>>> finished) ... >>>>>>>>> -> T2 8.0-trunk configuration ... >>>>>>>>> -> Building src/luabash.so. >>>>>>>>> -> INSTALL DYNLIB >>>>>>>>> /home/ingmar/dev/t2-trunk/src/Linux-x86_64/bash/luabash.so >>>>>>>>> -> LUA accelerator (C) 2006 by Valentin Ziegler & Rene Rebe, >>>>>>>>> ExactCODE >>>>>>>>> -> New config written to config/default/*. >>>>>>>>> -> Cleaning up. Configuration finished. >>>>>>>>> >>>>>>>>> Building tools in build/.../TOOLCHAIN/tools.cross: >>>>>>>>> -> Building tools.cross/wrapper/cmd_wrapper. >>>>>>>>> -> Building tools.cross/wrapper/strip_wrapper. >>>>>>>>> -> Building tools.cross/wrapper/{uname,arch}. >>>>>>>>> -> Building tools.cross/wrapper/install_wrapper. >>>>>>>>> -> Building tools.cross/bin/getdu. >>>>>>>>> -> Building tools.cross/bin/getfiles. >>>>>>>>> -> Building tools.cross/bin/fl_wrparse. >>>>>>>>> -> Building tools.cross/bin/fl_stparse. >>>>>>>>> -> Building tools.cross/lib/fl_wrapper.so. >>>>>>>>> -> Testing tools.cross/lib/fl_wrapper.so. >>>>>>>>> -> Creating tools.cross/lib/parse-config. >>>>>>>>> -> Creating tools.cross/lib/pkg_*_{pre,post}.conf >>>>>>>>> >>>>>>>>> Removing old error logs ... >>>>>>>>> -> Removing var/adm/logs/1-tar.err ... >>>>>>>>> >>>>>>>>> == 16:15:10 =[1]=> Building archiver/tar [1.22 8.0-trunk]. >>>>>>>>> -> Parallel build using 2 jobs enabled. >>>>>>>>> -> Reading package config: package/archiver/tar/tar.conf >>>>>>>>> -> Preparing build in src.tar.default.20090318.161509.1096.nexoc >>>>>>>>> -> Building. Writing output to $root/var/adm/logs/1-tar.out >>>>>>>>> !> checking whether program_invocation_name is declared... yes >>>>>>>>> !> checking whether program_invocation_short_name is >>>>>>>>> declared... yes >>>>>>>>> !> checking whether program_invocation_name is defined... yes >>>>>>>>> !> checking whether program_invocation_short_name is defined... >>>>>>>>> yes >>>>>>>>> !> checking whether btowc(EOF) is correct... configure: error: >>>>>>>>> cannot >>>>>>>>> run test program while cross compiling >>>>>>>>> !> See `config.log' for more details. >>>>>>>>> !> Due to previous errors, no 1-tar.log file! >>>>>>>>> !> (Try enabling xtrace in the config to track an error inside the >>>>>>>>> build >>>>>>>>> system.) >>>>>>>>> -> $root/var/adm/logs/1-tar.out -> 1-tar.err >>>>>>>>> == 03/18/09 16:15:49 =[1]=> Aborted building package tar. >>>>>>>>> -> Unmounting loop mounts ... >>>>>>>>> >>>>>>>>> >>>>>>>>> Do you have any ideas/pointers? >>>>>>>>> >>>>>>>>> Thanks and kind regards, >>>>>>>>> >>>>>>>>> Ingmar >>>>>>>>> >>>>>>>>> >>>>>>>>> René Rebe wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>>> Dear Ingmar, >>>>>>>>>> >>>>>>>>>> welcome in the T2 world. >>>>>>>>>> >>>>>>>>>> http://t2-project.org/contact/ >>>>>>>>>> >>>>>>>>>> Please try to post to the list in the future, as it potentially >>>>>>>>>> allows other people to comment as well (and I already >>>>>>>>>> nearly forgot about the mail in my populated inbox). >>>>>>>>>> >>>>>>>>>> How old is your trunk checkout (svn info)? A quick >>>>>>>>>> test build looks good for ARM / uclibc: >>>>>>>>>> >>>>>>>>>> == 03/18/09 16:15:16 =[1]=> Finished building package tar. >>>>>>>>>> >>>>>>>>>> Ingmar Schraub wrote: >>>>>>>>>> >>>>>>>>>>> Hallo, >>>>>>>>>>> >>>>>>>>>>> ich habe gestern meinen ersten Versuch mit t2 gestartet. Bislang >>>>>>>>>>> habe >>>>>>>>>>> ich viel mit buildroot/uClibc gearbeitet. >>>>>>>>>>> >>>>>>>>>>> Nun bin ich auf ein Problem gestossen und weiss hier leider (als >>>>>>>>>>> Neuling) nicht weiter. Das package 'tar' lässt sich nicht >>>>>>>>>>> übersetzen. >>>>>>>>>>> S.u. >>>>>>>>>>> >>>>>>>>>>> Als Target habe ich x86_64 mit glibc gewählt. Als build-host >>>>>>>>>>> verwende >>>>>>>>>>> ich ein 64-Bit Suse 11 Linux. >>>>>>>>>>> >>>>>>>>>>> Was kann ich tun, um das Problem zu beheben? >>>>>>>>>>> >>>>>>>>>>> Sorry, dass ich Sie direkt anschreibe, habe auf der Homepage >>>>>>>>>>> nach >>>>>>>>>>> einem >>>>>>>>>>> Link für eine Mailingliste gesucht, aber hab ihn leider nicht >>>>>>>>>>> gefunden... >>>>>>>>>>> >>>>>>>>>>> Wäre prima, wenn Sie mir irgendwie weiterhelfen könnten. >>>>>>>>>>> >>>>>>>>>>> == 09:42:36 =[1]=> Building archiver/tar [1.22 8.0-trunk]. >>>>>>>>>>> -> Parallel build using 2 jobs enabled. >>>>>>>>>>> -> Reading package config: package/archiver/tar/tar.conf >>>>>>>>>>> -> Preparing build in src.tar.default.20090318.094235.8777.nexoc >>>>>>>>>>> -> Building. Writing output to $root/var/adm/logs/1-tar.out >>>>>>>>>>> !> checking whether program_invocation_name is declared... yes >>>>>>>>>>> !> checking whether program_invocation_short_name is >>>>>>>>>>> declared... yes >>>>>>>>>>> !> checking whether program_invocation_name is defined... yes >>>>>>>>>>> !> checking whether program_invocation_short_name is defined... >>>>>>>>>>> yes >>>>>>>>>>> !> checking whether btowc(EOF) is correct... configure: error: >>>>>>>>>>> cannot >>>>>>>>>>> run test program while cross compiling >>>>>>>>>>> !> See `config.log' for more details. >>>>>>>>>>> !> Due to previous errors, no 1-tar.log file! >>>>>>>>>>> !> (Try enabling xtrace in the config to track an error >>>>>>>>>>> inside the >>>>>>>>>>> build >>>>>>>>>>> system.) >>>>>>>>>>> -> $root/var/adm/logs/1-tar.out -> 1-tar.err >>>>>>>>>>> == 03/18/09 09:43:27 =[1]=> Aborted building package tar. >>>>>>>>>>> -> Unmounting loop mounts ... >>>>>>>>>>> >>>>>>>>>>> Vielen Dank im voraus und viele Grüsse >>>>>>>>>>> >>>>>>>>>>> Ingmar Schraub >>>>>>>>>>>
1-groff.err.gz
Description: GNU Zip compressed data
----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to [email protected] with a subject of: unsubscribe t2
