Thanks a lot, it builds now fine!! regards,
Ingmar René Rebe wrote: > Hi, > > ah thanks. > > Committed revision 32652. > > Have fun, > René > > Ingmar Schraub wrote: >> Here you go. >> >> Thanks, Ingmar >> >> René Rebe wrote: >> >>> Yes, it helped, so it's csh (though we patch that away already, >>> strange). >>> >>> Can you also send me the build/.../var/adm/logs/1-groff.err? >>> >>> Ingmar Schraub wrote: >>> >>>> Please find it attached. I hope it helps. >>>> >>>> cheers, Ingmar >>>> >>>> René Rebe wrote: >>>> >>>> >>>>> Can you send me the write log file of the failed groff build: >>>>> >>>>> src.groff. ... fl_wrapper.wlog >>>>> >>>>> to get an idea what program created the /root/.history? >>>>> >>>>> Ingmar Schraub wrote: >>>>> >>>>>> Thanks a lot. I had disabled that package for now and the build is >>>>>> continuing. >>>>>> >>>>>> I noticed also that 'popt' wants 'gettext' first, but it wasn't built >>>>>> first. So I built it manually with ./scripts/Build-Pkg gettext and >>>>>> ran >>>>>> ./scripts/Build-Target again. That worked. >>>>>> >>>>>> regards, >>>>>> >>>>>> Ingmar >>>>>> >>>>>> René Rebe wrote: >>>>>> >>>>>> >>>>>>> Hi again, >>>>>>> >>>>>>> René Rebe wrote: >>>>>>> >>>>>>>> I think I do not see the offending file in the shortened log, >>>>>>>> >>>>>>> Heh it's the .history, I only looked at the #base lines: >>>>>>> >>>>>>> !> Created file outside basedir: /root/.history >>>>>>> !> base #1: /home/ingmar/dev/t2-trunk >>>>>>> !> base #2: >>>>>>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64 >>>>>>> >>>>>>> I'll take a look, now :-) >>>>>>> >>>>>>> >>>>>>>> but I guess some tch or so history file in the /root directory? >>>>>>>> >>>>>>>> I saw this recently, too but was too lazy to patch the configure >>>>>>>> script immediatly. >>>>>>>> >>>>>>>> Can take a look in some other minute. >>>>>>>> >>>>>>>> Ingmar Schraub wrote: >>>>>>>> >>>>>>>>> Hi René, >>>>>>>>> >>>>>>>>> that's a very fast fix! Impressive!! I tried and it worked just >>>>>>>>> fine. >>>>>>>>> Unfortunately I ran into the next issue: >>>>>>>>> >>>>>>>>> groff fails with >>>>>>>>> >>>>>>>>> == 16:39:31 =[1]=> Building archiver/tar [1.22 8.0-trunk]. >>>>>>>>> -> Parallel build using 2 jobs enabled. >>>>>>>>> -> Reading package config: package/archiver/tar/tar.conf >>>>>>>>> -> Preparing build in src.tar.default.20090318.163930.25665.nexoc >>>>>>>>> -> Building. Writing output to $root/var/adm/logs/1-tar.out >>>>>>>>> -> $root/var/adm/logs/1-tar.out -> 1-tar.log >>>>>>>>> == 03/18/09 16:40:46 =[1]=> Finished building package tar. >>>>>>>>> >>>>>>>>> == 16:40:47 =[1]=> Building base/groff [1.20.1 8.0-trunk]. >>>>>>>>> -> Reading package config: package/base/groff/groff.conf >>>>>>>>> -> Preparing build in src.groff.default.20090318.164046.8468.nexoc >>>>>>>>> -> Building. Writing output to $root/var/adm/logs/1-groff.out >>>>>>>>> !> ==[build_this_package:992 (last $?=0)> '[' ' >>>>>>>>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64/usr/doc/groff' >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ']' >>>>>>>>> !> ==[build_this_package:993 (last $?=0)> rmdir >>>>>>>>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64/usr/doc/groff >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> !> ==[build_this_package:996 (last $?=0)> return 0 >>>>>>>>> !> =[:609 (last $?=0)> set +o xtrace >>>>>>>>> !> Creating file list and doing final adaptions ... >>>>>>>>> !> Created file outside basedir: /root/.history >>>>>>>>> !> base #1: /home/ingmar/dev/t2-trunk >>>>>>>>> !> base #2: >>>>>>>>> /home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64 >>>>>>>>> !> removed >>>>>>>>> `/home/ingmar/dev/t2-trunk/build/default-8.0-trunk-generic-x86-64/var/adm/logs/1-groff.log' >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -> $root/var/adm/logs/1-groff.out -> 1-groff.err >>>>>>>>> == 03/18/09 16:42:17 =[1]=> Aborted building package groff. >>>>>>>>> >>>>>>>>> What's wrong here? >>>>>>>>> >>>>>>>>> regards, >>>>>>>>> >>>>>>>>> Ingmar >>>>>>>>> >>>>>>>>> René Rebe wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> Committed revision 32648. >>>>>>>>>> >>>>>>>>>> Yours, >>>>>>>>>> >>>>>>>>>> Ingmar Schraub wrote: >>>>>>>>>> >>>>>>>>>>> Thanks a lot René! >>>>>>>>>>> >>>>>>>>>>> Apparently I had overlooked the 'contact' section on your >>>>>>>>>>> website. >>>>>>>>>>> Sorry >>>>>>>>>>> for that. >>>>>>>>>>> >>>>>>>>>>> My trunk checkout is 'current' >>>>>>>>>>> >>>>>>>>>>> Path: . >>>>>>>>>>> URL: http://svn.exactcode.de/t2/trunk >>>>>>>>>>> Repository Root: http://svn.exactcode.de/t2 >>>>>>>>>>> Repository UUID: c5f82cb5-29bc-0310-9cd0-bff59a50e3bc >>>>>>>>>>> Revision: 32647 >>>>>>>>>>> Node Kind: directory >>>>>>>>>>> Schedule: normal >>>>>>>>>>> Last Changed Author: rene >>>>>>>>>>> Last Changed Rev: 32647 >>>>>>>>>>> Last Changed Date: 2009-03-18 15:55:58 +0100 (Wed, 18 Mar 2009) >>>>>>>>>>> >>>>>>>>>>> tar does not build with my settings (target x86_64, glibc). >>>>>>>>>>> >>>>>>>>>>> Here we go again: >>>>>>>>>>> Found 7 new/updated files in source tree: >>>>>>>>>>> -> Found new/updated file: >>>>>>>>>>> package/gnome2/gnome-python/gnome-python.desc >>>>>>>>>>> -> Found new/updated file: >>>>>>>>>>> package/gnome2/gnome-nettool/gnome-nettool.desc >>>>>>>>>>> -> Found new/updated file: package/gnome2/librsvg/librsvg.desc >>>>>>>>>>> -> ** list truncated to save space on the terminal ** >>>>>>>>>>> >>>>>>>>>>> Re-running configuration: >>>>>>>>>>> -> Aquiring config write lock (may take until other configs >>>>>>>>>>> finished) ... >>>>>>>>>>> -> T2 8.0-trunk configuration ... >>>>>>>>>>> -> Building src/luabash.so. >>>>>>>>>>> -> INSTALL DYNLIB >>>>>>>>>>> /home/ingmar/dev/t2-trunk/src/Linux-x86_64/bash/luabash.so >>>>>>>>>>> -> LUA accelerator (C) 2006 by Valentin Ziegler & Rene Rebe, >>>>>>>>>>> ExactCODE >>>>>>>>>>> -> New config written to config/default/*. >>>>>>>>>>> -> Cleaning up. Configuration finished. >>>>>>>>>>> >>>>>>>>>>> Building tools in build/.../TOOLCHAIN/tools.cross: >>>>>>>>>>> -> Building tools.cross/wrapper/cmd_wrapper. >>>>>>>>>>> -> Building tools.cross/wrapper/strip_wrapper. >>>>>>>>>>> -> Building tools.cross/wrapper/{uname,arch}. >>>>>>>>>>> -> Building tools.cross/wrapper/install_wrapper. >>>>>>>>>>> -> Building tools.cross/bin/getdu. >>>>>>>>>>> -> Building tools.cross/bin/getfiles. >>>>>>>>>>> -> Building tools.cross/bin/fl_wrparse. >>>>>>>>>>> -> Building tools.cross/bin/fl_stparse. >>>>>>>>>>> -> Building tools.cross/lib/fl_wrapper.so. >>>>>>>>>>> -> Testing tools.cross/lib/fl_wrapper.so. >>>>>>>>>>> -> Creating tools.cross/lib/parse-config. >>>>>>>>>>> -> Creating tools.cross/lib/pkg_*_{pre,post}.conf >>>>>>>>>>> >>>>>>>>>>> Removing old error logs ... >>>>>>>>>>> -> Removing var/adm/logs/1-tar.err ... >>>>>>>>>>> >>>>>>>>>>> == 16:15:10 =[1]=> Building archiver/tar [1.22 8.0-trunk]. >>>>>>>>>>> -> Parallel build using 2 jobs enabled. >>>>>>>>>>> -> Reading package config: package/archiver/tar/tar.conf >>>>>>>>>>> -> Preparing build in src.tar.default.20090318.161509.1096.nexoc >>>>>>>>>>> -> Building. Writing output to $root/var/adm/logs/1-tar.out >>>>>>>>>>> !> checking whether program_invocation_name is declared... yes >>>>>>>>>>> !> checking whether program_invocation_short_name is >>>>>>>>>>> declared... yes >>>>>>>>>>> !> checking whether program_invocation_name is defined... yes >>>>>>>>>>> !> checking whether program_invocation_short_name is defined... >>>>>>>>>>> yes >>>>>>>>>>> !> checking whether btowc(EOF) is correct... configure: error: >>>>>>>>>>> cannot >>>>>>>>>>> run test program while cross compiling >>>>>>>>>>> !> See `config.log' for more details. >>>>>>>>>>> !> Due to previous errors, no 1-tar.log file! >>>>>>>>>>> !> (Try enabling xtrace in the config to track an error >>>>>>>>>>> inside the >>>>>>>>>>> build >>>>>>>>>>> system.) >>>>>>>>>>> -> $root/var/adm/logs/1-tar.out -> 1-tar.err >>>>>>>>>>> == 03/18/09 16:15:49 =[1]=> Aborted building package tar. >>>>>>>>>>> -> Unmounting loop mounts ... >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Do you have any ideas/pointers? >>>>>>>>>>> >>>>>>>>>>> Thanks and kind regards, >>>>>>>>>>> >>>>>>>>>>> Ingmar >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> René Rebe wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> Dear Ingmar, >>>>>>>>>>>> >>>>>>>>>>>> welcome in the T2 world. >>>>>>>>>>>> >>>>>>>>>>>> http://t2-project.org/contact/ >>>>>>>>>>>> >>>>>>>>>>>> Please try to post to the list in the future, as it potentially >>>>>>>>>>>> allows other people to comment as well (and I already >>>>>>>>>>>> nearly forgot about the mail in my populated inbox). >>>>>>>>>>>> >>>>>>>>>>>> How old is your trunk checkout (svn info)? A quick >>>>>>>>>>>> test build looks good for ARM / uclibc: >>>>>>>>>>>> >>>>>>>>>>>> == 03/18/09 16:15:16 =[1]=> Finished building package tar. >>>>>>>>>>>> >>>>>>>>>>>> Ingmar Schraub wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hallo, >>>>>>>>>>>>> >>>>>>>>>>>>> ich habe gestern meinen ersten Versuch mit t2 gestartet. >>>>>>>>>>>>> Bislang >>>>>>>>>>>>> habe >>>>>>>>>>>>> ich viel mit buildroot/uClibc gearbeitet. >>>>>>>>>>>>> >>>>>>>>>>>>> Nun bin ich auf ein Problem gestossen und weiss hier leider >>>>>>>>>>>>> (als >>>>>>>>>>>>> Neuling) nicht weiter. Das package 'tar' lässt sich nicht >>>>>>>>>>>>> übersetzen. >>>>>>>>>>>>> S.u. >>>>>>>>>>>>> >>>>>>>>>>>>> Als Target habe ich x86_64 mit glibc gewählt. Als build-host >>>>>>>>>>>>> verwende >>>>>>>>>>>>> ich ein 64-Bit Suse 11 Linux. >>>>>>>>>>>>> >>>>>>>>>>>>> Was kann ich tun, um das Problem zu beheben? >>>>>>>>>>>>> >>>>>>>>>>>>> Sorry, dass ich Sie direkt anschreibe, habe auf der Homepage >>>>>>>>>>>>> nach >>>>>>>>>>>>> einem >>>>>>>>>>>>> Link für eine Mailingliste gesucht, aber hab ihn leider nicht >>>>>>>>>>>>> gefunden... >>>>>>>>>>>>> >>>>>>>>>>>>> Wäre prima, wenn Sie mir irgendwie weiterhelfen könnten . >>>>>>>>>>>>> >>>>>>>>>>>>> == 09:42:36 =[1]=> Building archiver/tar [1.22 8.0-trunk]. >>>>>>>>>>>>> -> Parallel build using 2 jobs enabled. >>>>>>>>>>>>> -> Reading package config: package/archiver/tar/tar.conf >>>>>>>>>>>>> -> Preparing build in >>>>>>>>>>>>> src.tar.default.20090318.094235.8777.nexoc >>>>>>>>>>>>> -> Building. Writing output to $root/var/adm/logs/1-tar.out >>>>>>>>>>>>> !> checking whether program_invocation_name is declared... yes >>>>>>>>>>>>> !> checking whether program_invocation_short_name is >>>>>>>>>>>>> declared... yes >>>>>>>>>>>>> !> checking whether program_invocation_name is defined... yes >>>>>>>>>>>>> !> checking whether program_invocation_short_name is >>>>>>>>>>>>> defined... >>>>>>>>>>>>> yes >>>>>>>>>>>>> !> checking whether btowc(EOF) is correct... configure: error: >>>>>>>>>>>>> cannot >>>>>>>>>>>>> run test program while cross compiling >>>>>>>>>>>>> !> See `config.log' for more details. >>>>>>>>>>>>> !> Due to previous errors, no 1-tar.log file! >>>>>>>>>>>>> !> (Try enabling xtrace in the config to track an error >>>>>>>>>>>>> inside the >>>>>>>>>>>>> build >>>>>>>>>>>>> system.) >>>>>>>>>>>>> -> $root/var/adm/logs/1-tar.out -> 1-tar.err >>>>>>>>>>>>> == 03/18/09 09:43:27 =[1]=> Aborted building package tar. >>>>>>>>>>>>> -> Unmounting loop mounts ... >>>>>>>>>>>>> >>>>>>>>>>>>> Vielen Dank im voraus und viele Grüsse >>>>>>>>>>>>> >>>>>>>>>>>>> Ingmar Schraub >>>>>>>>>>>>>
----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to [email protected] with a subject of: unsubscribe t2
