Hi,
On Feb 22, 2015, at 13:47, Dan <[email protected]> wrote:
> Hi René
>
> thx for you work.
>
> I had/have the problem on real hardware ( not with qemu).
> I thought it has to do something with a cdrom-driver, because it arise
> only with SATA-CDrom, with the older IDE/ATA-CDrom it works fine.
Could be, from my memory it was the reverse with Qemu/KVM though.
I just checked with VMWare on a Mac, it uses SCSI there by default for Linux
and it works, …
I continue another day.
René
> Dan
>
> At Sun, 22 Feb 2015 11:59:00 +0100,
> René Rebe wrote:
>>
>> Hi,
>>
>> On Feb 21, 2015, at 23:16, Iulian Demetrescu <[email protected]>
>> wrote:
>>
>>> Hi All,
>>>
>>> Hi Rene,All,
>>>
>>> i downloaded "t2-9.0-r43749-minimal-i586-mmx_cd1.iso" burned to a CD and
>>> tried booting in VirtualBox 4.3.22. Unfortunately boot fails to find the
>>> CDROM drive and as a consequence 2nd_stage_* is not found. Curious enough
>>> on a barebone PC the boot process works fine. Am i missing something?
>>
>>
>> In some Qemu/KVM configurations I also spotted some strange behavior, that
>> the first, auto-run of the classic installer boot would not find the cdrom
>> and stage files, but a second manual-run (enter, enter, enter - or manually
>> speccing the /dev/*cdrom* device) would do.
>>
>> As I spend really a lot time that other weekend on T2 trunk cross and
>> non-x86 and other show-stoppper fixing I really had no time to investigate.
>>
>> Maybe it is timing, and/or u/dev device-node creation related.
>>
>> René
>>
>> --
>> ExactCODE GmbH, Lietzenburger Str. 42, DE-10789 Berlin
>> http://exactcode.com | http://exactscan.com | http://ocrkit.com |
>> http://t2-project.org | http://rene.rebe.de
>>
--
ExactCODE GmbH, Lietzenburger Str. 42, DE-10789 Berlin
http://exactcode.com | http://exactscan.com | http://ocrkit.com |
http://t2-project.org | http://rene.rebe.de
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
