The good news is that it works with other projections :-) The main problem I have with projection 3857 (and 4326) is that tiles does not reload when I change projection. I do not know why.
I am abroad for one week. I will stop the geoservice during this time - I am not sure it doesn't kill other service due to limitation memory. We will talk deeper when I will be back. Julien Le 19/07/13 02:27, André Pirard a écrit : > Julien, > > It should be avoided like the plague to reconfigure the screen map > projection of JOSM. > Especially when it is not necessary ... see below ... > JOSM normally uses Mercator EPSG:3857 screen projection. > That way, it can display maps served in EPSG:3857, EPSG:900913 and > EPSG:4326. > That is what almost all servers in the world serve, sometimes in > addition to local projections. > This (EPSG:4326) is what IGN, AGIV and Urbis can serve in addition to > Lambert. > But SPW can only serve Lambert. > It should be *urgently* asked that all servers support at least > EPSG:4326 like the others. > In addition to what they already use, that is. > > The reason is that if JOSM cannot reproject data. > If it is screen configured with Lambert, it will be unable to display > 4326 data, notably Bing maps but many others. > The reason is that Openlayers cannot reproject data (too CPU consuming > in JavaScript). > The reason is that Merkaartor is buggy when it converts Lambert->Mercator. > The reason is that, like Merkaartor, most programs are mostly tested > with 4326 and may show bugs otherwise. > The reason is that there are many reasons. > The reason is also that if you use screen projection-1 for this job, > projection-2 for this another and projection-1 for yet another, you > will soon be fed up constantly reconfiguring JOSM and stopping it, and > most of all forgetting to reconfigure it and wonder why you don't see > your map. > > If it's really impossible to have a server configured to serve 4326, > the best solution is to use a proxy that reprojects it. > I have used Mapproxy very effectively that way, but it's a tedious job > to configure it. > It would be much more effective to set up a single Mapproxy for all of > us, especially with a good cache. > > But by far the simplest way is to configure the source servers to > serve EPSG:4326. > *So simple that your server is already configured for 3857 and 4326.** > **There is NO NEED to reconfigure the JOSM screen.** > *See here the impressive list of projections that your server > supports. > <http://fastre.info:8080/geoserver/OSMUrbis/wms?REQUEST=GetCapabilities&SERVICE=WMS> > Here are the WMS requests to get your images (in EPSG:3857): >> GET >> http://api.openstreetmap.org/api/0.6/map?bbox=4.3557754,50.84655,4.3845868,50.8600845 >> Grabbing WMS >> http://fastre.info:8080/geoserver/OSMUrbis/wms?SERVICE=WMS&FORMAT=image/jpeg&VERSION=1.1.1&SERVICE=WMS&REQUEST=GetMap&LAYERS=StJosse&STYLES=&SRS=EPSG:3857&WIDTH=500&HEIGHT=500&BBOX=486150.9468658,6595682.2161044,486402.0578921,6595933.3271307 >> Grabbing WMS >> http://fastre.info:8080/geoserver/OSMUrbis/wms?SERVICE=WMS&FORMAT=image/jpeg&VERSION=1.1.1&SERVICE=WMS&REQUEST=GetMap&LAYERS=StJosse&STYLES=&SRS=EPSG:3857&WIDTH=500&HEIGHT=500&BBOX=486150.9468658,6595431.1050781,486402.0578921,6595682.2161044 > ... > ... and I saw your images perfectly. > > I hope that this little blurb will help make more usable servers in > Belgium. > > Cheers, > > André. > > > > On 2013-07-18 17:07, Julien Fastré wrote : >> Hi, >> >> With the help of eMerzh, yesterday, we converted the raster image >> downloaded from Urbis to a geotiff (georeferenced tiff). >> >> I upload the image to my (little) server and I could serve it through >> a WMS, and the use it as imagery in JOSM. >> >> Could you try if it works by yourself ? >> >> This is a short manual: >> >> * launch JOSM; >> * go to the preferences (F12) >> * Switch to Lambert Belge 1972 (third tab on the left - map >> preférences / préférences de la carte) (the geotiff is in Lambert >> Belge, EPSG:31370) ; >> * Add the WMS service: >> o go to WMS/TMS ; >> o click on +WMS >> o add the URL : http://fastre.info:8080/geoserver/OSMUrbis/wms >> o click on "obtain the layer" / obtenir les calques ; >> o select the commune of St-Josse (currently the only one available) >> * Then, download the OSM data in Saint-Josse ; >> * Zoom to a high level (a high level does lower requests, it will >> be more fast) >> >> >> The server is very little (512Mo), the geotif are quite big (~5Go). >> This is just a test (we should also add a licence on the service...) >> >> I will let the server open until tomorrow around 10', then I will >> stop for a week. Then, if it works, I may consider host some commune >> - we may talk about that. >> >> (Another easier way may be to share the geotiff by torrent, everyone >> may use it in JOSM with a good tutorial) >> >> Julien >> >> >> Le 17/07/13 22:15, Julien Fastré a écrit : >>> Hi ! >>> >>> Thanks for all those informations ! >>> >>> It's a good news that CIRB have some considerations for OSM. >>> >>> I am also trying to convert sid to jpg (I skip that line in your >>> email), but I must re-compile GDAL. >>> >>> If you have geotiff or some commons georeferenced raster I may serve >>> them with WMS through geoserver from my (little) server. >>> >>> Julien >>> >>> Le 17/07/13 15:38, eMerzh a écrit : >>>> >>>> Dag Jo ;) >>>> >>>> For 3D i think they mean like 3d buildings (with a CAD tool or smth >>>> ) like OSM3D & friends >>>> >>>> They also have like "oblique" images ... it think it's more or >>>> less like bing birdview ... but there are not released ... (yet ?) >>>> >>>> >>>> For the ortho, i've convert my first sid file to jpg ... i have to >>>> figure out how to cut that in tiles and georef them... >>>> i'm really a nooob in that area so if someone can help :) >>>> >>>> >>>> >>>> >>>> 2013/7/17 Jo <[email protected] <mailto:[email protected]>> >>>> >>>> Je pense que Glenn Plas a les compétences réquises (et un >>>> serveur?). >>>> >>>> Glenn, weet jij hoe je een server moet opzetten die WMS doet op >>>> basis van deelimages? >>>> >>>> Jo >>>> >>>> 2013/7/17 eMerzh <[email protected] <mailto:[email protected]>> >>>> >>>> Ah oui, >>>> j'ai oublié : >>>> >>>> * le LIDAR sera mis à disposition dans le futur sous la >>>> même license ...via iribox... >>>> pour l'instant ce n'est pas encore disponible, a cause d'un >>>> problème de distribution .... >>>> ( il y a ~900Fichiers de 900 Mo chacun ...) >>>> >>>> >>>> Voilà ... >>>> >>>> Sinon, je voudrai mettre a dispo les ortho pour les >>>> utiliser dans JOSM ... donc je cherche un moyen de faire ça ... >>>> (je serai p-e ralenti par mes vacances et par le faite que >>>> je ne dispose pas vraiment d'un serveur ou je fais ce que >>>> je veux... ) >>>> >>>> je vous tiens au courant :) >>>> >>>> >>>> >>>> >>>> 2013/7/17 eMerzh <[email protected] <mailto:[email protected]>> >>>> >>>> Hi everybody ... >>>> here are the feedback from my meeting with the CIRB. >>>> as i'm more confortable with french the following >>>> message will be in french ... sorry >>>> >>>> Donc : >>>> * Au niveau des mises à jours, le wfs & wms est >>>> actualisé toutes les semaines alors que l'interface de >>>> téléchargment ne l'est que 1 fois par trimestre. >>>> >>>> Attention, la mise à jour correspond à l'état actuel >>>> du survey ... toutes les zones ne sont pas mises à >>>> jours toutes les semaines... >>>> * A chaque mise à jour d'un objet, un ID de version >>>> centralisé est incrémenté et attribué à un objet. >>>> donc pour savoir les derniers objets avec des >>>> "potentielles" mises à jours, il faut trier les objets >>>> par identifiants de version desc. >>>> >>>> * un nouveau système de versioning plus sémantique et >>>> informatif sur les modifications devrait voir le jour >>>> début de l'année prochaine >>>> >>>> * Le cirb est évidemment intéressé par les retours sur >>>> les données. >>>> Vous pouvez faire vos retour soit via moi (un petit >>>> mail ) soit via la page du wiki ici présente: >>>> http://wiki.openstreetmap.org/wiki/Urbis_feedback >>>> ou directement via la IRISLINE ( >>>> >>>> http://www.cirb.irisnet.be/fr/catalogue-de-services/software/sincrho-1/centre-de-documentation/manuels-de-reference/mode-demploi/contacts/support-client-iris-line >>>> ) >>>> l'idée est d'envoyer les retours en paquet plutot que 1 >>>> par 1 pour éviter un surplus de travail >>>> >>>> * Les orthophotos sont disponibles au téléchargement >>>> via la Irisbox ou via le servie de DL >>>> >>>> (http://www.cirb.irisnet.be/fr/catalogue-de-services/urbis/telechargement) >>>> La résolution est de 7.5cm si téléchargé par commune et >>>> 10cm? si téléchargé pour la région entière... >>>> Elles sont évidemment disponible sous la même licence >>>> que le reste. >>>> >>>> * La 3D devrais arriver l'année prochaine ... elle >>>> aussi sous licence libre. >>>> >>>> * Pour tout ce qui est routage (vitesse, circulation, >>>> restrictions, ...) , le CIRB n'a pas de données.... il >>>> faut s'adresser à Bruxelles mobilité (mais c'est pas >>>> certains qu'ils possèdent l'info , ou pas forcément à >>>> jours) >>>> voir http://data.irisnetlab.be/ pour les données en >>>> OpenData >>>> >>>> * Pour les infos PMR: voir BXL mobilité ou les communes >>>> directement. >>>> >>>> * Dans Urbis les données sur les oneway par exemple ne >>>> sont pas à jour ... et il ya pas de plan de le faire .... >>>> ils pensent à éventuellement Crowdsourcer ... >>>> >>>> >>>> * Pour les impétrants , pareils il faut demander au >>>> impétrants eux même .... le CIRB n'a pas l'info >>>> pareil pour les hydrant (au pompiers ou a vivaqua) >>>> >>>> * Nous sommes invité à participé au UserClub du CIRB ... >>>> >>>> * Le CIRB à rappelé son intention de publier >>>> directement les nouvelles données sous licence libre >>>> pour autant qu'ils aient la possibilité de le faire. >>>> >>>> * J'ai parlé d'éventuel support de OSM: "Pourquoi >>>> pas... " ... ils vont voir avec le service de com' ... >>>> si on veux leurs soutient dans des évènements ponctuels >>>> , on peu tjs tenter notre coup. >>>> >>>> * Il n'ont pas forcément besoin que OSM-be soit une >>>> entité juridique (ASBL, ...) l'organisation actuelle >>>> suffit. >>>> >>>> >>>> FYI, la réunion était avec Mr E. Auquiere, C Hannecart >>>> + une 3ieme personne dont j'ai oublié le nom. >>>> >>>> >>>> En écrivant le résumé j'ai déjà plusieurs question qui >>>> me viennent pour un éventuel autre contact . donc >>>> n'hésitez pas on fait un batch ;) >>>> >>>> >>>> Voilà je pense avoir tout dit .... >>>> >>>> Bonne journée sous le soleil ;) >>>> >>>> Brice >>>> >>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Talk-be mailing list >>>> [email protected] <mailto:[email protected]> >>>> http://lists.openstreetmap.org/listinfo/talk-be >>>> >>>> >>>> >>>> _______________________________________________ >>>> Talk-be mailing list >>>> [email protected] <mailto:[email protected]> >>>> http://lists.openstreetmap.org/listinfo/talk-be >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Talk-be mailing list >>>> [email protected] >>>> http://lists.openstreetmap.org/listinfo/talk-be >>> >>> >>> >>> _______________________________________________ >>> Talk-be mailing list >>> [email protected] >>> http://lists.openstreetmap.org/listinfo/talk-be >> >> >> >> _______________________________________________ >> Talk-be mailing list >> [email protected] >> http://lists.openstreetmap.org/listinfo/talk-be >
_______________________________________________ Talk-be mailing list [email protected] http://lists.openstreetmap.org/listinfo/talk-be
