Karen,
What do you mean by dizzy actually? Normally that or fatigue is a comfort or
sound sensitivity issue.
For example, these days I've very sensitive to frequencies in the mid range and
mid treble. That's
about 400hz - 1khz and 6khz-10khz. You may want to figure out if your sensitive
to sound issues in
certain parts of the spectrum. Or perhaps you mean something else. This is just
my experience with
various people.
Good luck with your search through,
Nick
On 1/14/22 15:10, Karen Lewellen wrote:
Hi Erica,
The Sony Mdr-7506 headphones have been a staple of audio production for
honestly decades. I got my pair in hmmm2004 or 2005.
However, this is a fine example of my personal issue...I cannot use them.
The impedance on this model is 24, and they make me dizzy.
I do have production assistants use them, and in all these years the ear pads
remain flawless.
That being said, I may be reaching out to Sony directly, as my e-mail exchange
with JVC is becoming rather frustrating smiles.
best,
Kare
On Fri, 14 Jan 2022, Erica Peterson wrote:
You may have better luck picking a few common brands and going to the
manufacturer websites. Sony, for example, will let you select multiple models
for comparison across features:
https://www.sony.ca/en/electronics/headphones/t/headband-headphones
FWIW, about 5 years ago I got a Sony MDR-7506 headset -- admittedly, not based on any
sort of audiophile specs, but because I'd seen them used in recording studios and figured
that was a strong point in their favor. I'm still very happy with it but with two small
quibbles: (1) the cable doesn't detach, so it would be a pain to replace if I were to
damage it, and (2) the material covering the pads degrades after a few years. I just
replaced the pads with "Wicked Cushions" from Amazon, which are made to fit
popular headset models. The Wicked Cushions are great so far.
Erica
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Friday, January 14th, 2022 at 1:02 AM, Nicholas Krause via talk
<[email protected]> wrote:
On 2022-01-14 12:50 a.m., Karen Lewellen wrote:
Hi there,
You know something I have a hard time picturing what closed back
actually means.
to my imagination open back means nothing behind my head, which is my
preference. are closed back those behind your head then?
I agree on 32 for impedance..but sometimes they are higher. even with
no amp involved.
Kare
Karen,
Open Backs have open grills or leak sound through the outer part of the
ear cups. They don't isolated sound the way most headphones do. You
don't see them outside of the audiophile market. The problem with
closing or isolating sound is frequency issues basically. Sound stage is
one big improvement on them as you can let the drivers actually breathe.
Most consumer amps in cellphones or whatever can get about 60-90 ohms if
your asking. So anything beyond that is not good. This is a problem for
IEMS in the audiophile market as they have to gear them for cellphones
actually so most are around 32-48 ohms from memory.
Nick
On Thu, 13 Jan 2022, Nicholas Krause wrote:
On 2022-01-13 4:25 p.m., Karen Lewellen via talk wrote:
Hi there,
Fine and interesting list.
To be sure, the idea of noise cancellation, or any variation's is a no,
not just because of the sense of position, but because I have
something
talking in my ears when I use them in this particular setting..no phone
ringing, door bells, or the all important music playing in the
background.
As I have been a radio producer, and professional singer for many many
years, over the ear headphones are the most comfortable, speaking
personally.
I truly dislike earbuds, they tend not to stay in my ears, to put
pressure on my ear canal etc...and the buttons are a no, mic interferes
with the machine.
The most important thing, for this particular set of headphones
though is
A combination of frequency range, sensitivity, impedance, and driver
units...oh and input power.
a few settings in the wrong direction, and the headphones will make me
dizzy..literary.
And those numbers can be device specific, what I will use for my
reading
edge, differs for what I use for production, or music listening, or
whatever.
It is part of why once found I may buy more than one pair.
Cannot fault you for using the same ones since the 80's. Had a set
once
I got from radio shack that I used for more than a decade as well.
Goodness but I miss radio shack.
Kare
Greetings Karen,
I would not find the model in the previous email. However, my two sense
are over ear can mean different things. A current pair of headphones was
stated that but it's more what Hugh was calling something else.
The other things were I normally prefer open backed as it's the only way
to not screw around with frequency issues. I've my reasons. As to
standard closed backs AKG, Sennheiser, Sony are the big good players
from memory. I'm not sure of the site design for your needs so sorry :(.
Your original pair was around 200 dollars from memory and they all
have something good in that price point to my knowledge.
As to weight normally anything under 400 grams is fine for most people.
And for impendance it should be 32 ohms or less if your not using an
actual amp.
Take care,
Nick
On Thu, 13 Jan 2022, D. Hugh Redelmeier via talk wrote:
| From: Karen Lewellen via talk [email protected]
| If you desire a visual idea then perhaps google jvc ha-s44x.
Thanks.
From past discussions, I know your shopping technique isn't like
mine.
But I'll mention my considerations on the off chance you might
find them
useful.
Most wired headphones are electrically / electronically
interchangeable. Of course that's a good thing. It also means
that > there
are a lot to choose from.
There are lots of issues of sound reproduction quality, but to be
honest, all should have sound quality that is good enough for a
reader
(as I understand it).
I would imagine that the main issues are comfort -- a very
individual
thing. Oh, and durability -- not something in the specs!
Here's what I glean from the specs of your old headphones:
- closed (i.e. they try to block sound from your environment)
- over-ear [I find such headphones uncomfortable fairly quickly]
- 5.57 ounces
- button controls (what do they control?)
- 1.2 m cable [the units are unspecified but 1.2 ft would be
very short]
Do you use the buttons? What for?
I think "over-ear" means that these clamp on your ear as opposed to
clamping on your head around the ear ("circumaural"). I find
over-ear
very uncomfortable after a few minutes but I seem to be in a
minority.
Do you really want to have sound isolation from the room
("closed")?
I imagine "situational awareness" would be useful.
Out of habit, I use ancient Sennheiser HD430 phones. They are
circumaural, light, open [i.e. I can hear things going on in the
room], good enough sound. They have replaceable cables and ear pads
(but now hard to find). Out of production since 1986. I find that
even these get uncomfortable after a while.
My current favourite is ear-buds. The ones with a selection of
soft
tips, not the hard ones. You can get decent inexpensive ones from
China.
I have, for example:
https://www.aliexpress.com/item/1005002184896879.html
Currently C$16.84 without microphone. I paid less.
There are many other brands that are likely fine.
There is an enthusiastic following for "Chi-fi".
TWS (true wireless stereo) headphones are amazingly convenient
if you > have
Bluetooth. But you don't. There are a lot of adapters to convert
analog
to Bluetooth but I don't have any experience with them.
Post to this mailing list [email protected]
Unsubscribe from this mailing list >
https://gtalug.org/mailman/listinfo/talk
Post to this mailing list [email protected]
Unsubscribe from this mailing list
https://gtalug.org/mailman/listinfo/talk
Post to this mailing list [email protected]
Unsubscribe from this mailing list https://gtalug.org/mailman/listinfo/talk
---
Post to this mailing list [email protected]
Unsubscribe from this mailing list https://gtalug.org/mailman/listinfo/talk
