OK, I am using Eloquence, and Thunderbird. Reading to the end, or
arrowing line by line, it doesn't matter - I do not see the behavior you
are experiencing, sorry. Yet, I do appreciate that you may have another
synthesizer, and you may have settings or even apps that could cause
this kind of behavior, so the following will be of general interest,
annd hence you will have to do a bit of playing to see what would help
you out.
Looking through the line in question, the main differences between the
two I's, that I noticed, is that there is a comma at the end of the
preceeding word of the first I. Now, if some ap you have installed, or
even your synthesizer's firmware interprets a capitalized I in the
beginning of a clause, should be pronounced as the Roman number 1, you
are right at the core of the issue.
Solutions?
My first go, would have been to copy the line in question to a blank
document in something like Notepad. This so as to let you play around
with it, without disturbing anything. try to edit the line, removing the
comma, and then let the synthesizer read it out to you. Does the same
behavior display? Try leaving the comma in place, but break the phrase
into two different lines, that the first line will hold the text up to
the comma, and the second line will start out with the first I. Arrow up
and down, realizing how your synth will do the job.
If any of the above would improve the speech, chances are that my guess
had something to it - your screen reader interprets the first I as Roman
number 1. Numerous reasons could play their role, the two main ones
would be the synth used may have this kind of built-in interpretation,
and the second one would be any apps you have installed. So try turning
off any apps that may have an impact on your textual interpretation. I
do know, there used to exist an app on App Central for making the speech
read out Roman numbers correctly, so if you happen to be a user of that
one, it might be one to turn off for the testing. And again, changing
the synth may be the whole solution worth.
Hope any of this would prove helpful in your tracing the reason for this
behavior. Like I said, I did not hear the pronunciation you described.
To me, both the I's were spoken properly as what they inreality are, the
capitalized letter I. this even if arrowed up and down, or left and
right through your sample line. There did exist no difference in the
pronunciation. Hence, you may have something in use on your system, that
causes this kind of behavior to come through.
Like others on the list, if you happen to trace a possible reason for
the behavior, would you mind to post the results to the list? At least
it would be of informative value. And who knows, probably it could be
the basis for some kind of "fixing app". :)
David
On 7/22/2016 6:05 PM, Carol and Roger via Talk wrote:
Can anyone explain why my screen says two different things when
pronouncing the first "I" in the below partial sentence?
Hi Carol, I will let you know if I
This was in an email and when I opened the message, both of the I's
said "eye". When I arrowed through the message, one line at a time,
the first "I" was spoken as "one" and the second was spoken as "eye."
As far as I can tell, they both have the same unicode symbol and
everything seems equal. Yes, I know it is not a big deal, I am just
puzzled as to why it would happen. Thanks. Also, I sent this message
to myself before sending it to the group and it still does the same
thing. There are many I's in this message and they all are spoken
correctly except the one in the message. Really, I am mostly curious
as to why only one letter would change its pronunciation
Carol
_______________________________________________
Any views or opinions presented in this email are solely those of the
author and do not necessarily represent those of Ai Squared.
For membership options, visit
http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/trailerdavid%40hotmail.com.
For subscription options, visit
http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com
List archives can be found at
http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
David
On 7/22/2016 6:05 PM, Carol and Roger via Talk wrote:
Can anyone explain why my screen says two different things when
pronouncing the first "I" in the below partial sentence?
Hi Carol, I will let you know if I
This was in an email and when I opened the message, both of the I's
said "eye". When I arrowed through the message, one line at a time,
the first "I" was spoken as "one" and the second was spoken as "eye."
As far as I can tell, they both have the same unicode symbol and
everything seems equal. Yes, I know it is not a big deal, I am just
puzzled as to why it would happen. Thanks. Also, I sent this message
to myself before sending it to the group and it still does the same
thing. There are many I's in this message and they all are spoken
correctly except the one in the message. Really, I am mostly curious
as to why only one letter would change its pronunciation
Carol
_______________________________________________
Any views or opinions presented in this email are solely those of the
author and do not necessarily represent those of Ai Squared.
For membership options, visit
http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/trailerdavid%40hotmail.com.
For subscription options, visit
http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com
List archives can be found at
http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
_______________________________________________
Any views or opinions presented in this email are solely those of the author
and do not necessarily represent those of Ai Squared.
For membership options, visit
http://lists.window-eyes.com/options.cgi/talk-window-eyes.com/archive%40mail-archive.com.
For subscription options, visit
http://lists.window-eyes.com/listinfo.cgi/talk-window-eyes.com
List archives can be found at
http://lists.window-eyes.com/private.cgi/talk-window-eyes.com
