Load the Dell poweredge preboot disc, i can't remember the correct name but it comes with all dell servers and it will take care of everything. I have 2950's and that is how I load all of my netware servers. I think it is a management disc. You can also download it from dell's website.
Sent from my iPhone On Jul 23, 2010, at 11:53 AM, "John Hawk" <[email protected]> wrote: > If you get enough drivers to load for the hard drive, you can continue the > install but that will cause some work arounds later. > If you get the hard drive and the nic, you'd be in good shape. > Once netware is up, the CD should start working and you can do HDETECT or > maybe it was HWDETECT. > Best bet is to get the CD drive working in DOS. > >>>> Brien J. Bednara <[email protected]> 7.23.2010 11:38 AM >>> > I am installing Netware on a recycled Dell 2950 Poweredge server and I can > get it to begin but it gets to a driver loading stage where it wants some > drivers. I found the drivers on the Novell site and have them ready but > cannot get them to the machine since I cannot get it to see the CD if it > boots to DOS and it doesn't have a floppy drive and I can't figure out how to > get it to see a flash drive. Any ideas from the Novell Gurus? > > Brien > > > _______________________________________________ > Tech-geeks mailing list > [email protected] > http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks > > _______________________________________________ > Tech-geeks mailing list > [email protected] > http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks | Subscription info at http://www.tech-geeks.org |
