another option is to find a usb floppy drive.
That's how I load my 3rd party drivers.

On Fri, Jul 23, 2010 at 2:57 PM, Daniel Zobel <[email protected]>wrote:

> Load the Dell poweredge preboot disc, i can't remember the correct name but
> it comes with all dell servers and it will take care of everything.  I have
> 2950's and that is how I load all of my netware servers.  I think it is a
> management disc.  You can also download it from dell's website.
>
> Sent from my iPhone
>
> On Jul 23, 2010, at 11:53 AM, "John Hawk" <[email protected]> wrote:
>
> > If you get enough drivers to load for the hard drive, you can continue
> the install but that will cause some work arounds later.
> > If you get the hard drive and the nic, you'd be in good shape.
> > Once netware is up, the CD should start working and you can do HDETECT or
> maybe it was HWDETECT.
> > Best bet is to get the CD drive working in DOS.
> >
> >>>> Brien J. Bednara <[email protected]> 7.23.2010 11:38 AM >>>
> > I am installing Netware on a recycled Dell 2950 Poweredge server and I
> can get it to begin but it gets to a driver loading stage where it wants
>  some drivers.  I found the drivers on the Novell site and have them ready
> but cannot get them to the machine since I cannot get it to see the CD if it
> boots to DOS and it doesn't have a floppy drive and I can't figure out how
> to get it to see a flash drive.  Any ideas from the Novell Gurus?
> >
> > Brien
> >
> >
> > _______________________________________________
> > Tech-geeks mailing list
> > [email protected]
> > http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
> >
> > _______________________________________________
> > Tech-geeks mailing list
> > [email protected]
> > http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
> | Subscription info at http://www.tech-geeks.org |
>



-- 
Chris McMahon
Director of Technology
Belleville Public School District #118
105 West A St.
Belleville, IL  62220
(618) 233-2830
[email protected]
| Subscription info at http://www.tech-geeks.org |

Reply via email to