Yes, it is mounted. I guess I will need to take it down to do some
troubleshooting.
Tammy McLane
Technology Coordinator
Argenta-Oreana Middle/High School
200 E. East St.
Argenta, IL 62501
phone: 217-795-2163 x.1326
fax: 217-795-4502
Quoting Jeremy Rodebaugh <j...@arthur.k12.il.us>:
I guess I should be more specific. If it is not mounted cant you swap it
and another projector to determine if the issue is the projector itself
or it is a communication issue.
-----Original Message-----
From: tech-geeks-boun...@tech-geeks.org
[mailto:tech-geeks-boun...@tech-geeks.org] On Behalf Of Jeremy Rodebaugh
Sent: Tuesday, September 28, 2010 1:23 PM
To: Tech-Geeks Mailing List
Subject: Re: [tech-geeks] SMART board/Epson projector issue
Is the projector mounted?
-----Original Message-----
From: tech-geeks-boun...@tech-geeks.org
[mailto:tech-geeks-boun...@tech-geeks.org] On Behalf Of Jared Lynn
Sent: Tuesday, September 28, 2010 1:10 PM
To: Tech-Geeks Mailing List
Subject: Re: [tech-geeks] SMART board/Epson projector issue
What is the resolution set to for the output to the projector?
Thanks,
Jared Lynn
PORTA CUSD #202 Technology Coordinator
Email: jl...@porta202.org
Phone: 217-501-4920
On Sep 28, 2010, at 12:34 PM, tmcl...@argenta-oreana.org wrote:
One of our teachers is projecting a powerpoint presentation on her
SMART board with an Epson 400W LCD projector but the top 1/6 of the
display is a black bar. The powerpoint slide looks fine on her computer
monitor. When she tries to orient the board, she cannot see the top
three points to tap. I have not run into this issue before. Hoping one
of you have a quick fix for me. ;)
TIA,
Tammy
Tammy McLane
Technology Coordinator
Argenta-Oreana Middle/High School
200 E. East St.
Argenta, IL 62501
phone: 217-795-2163 x.1326
fax: 217-795-4502
| Subscription info at http://www.tech-geeks.org |
| Subscription info at http://www.tech-geeks.org |
| Subscription info at http://www.tech-geeks.org |
| Subscription info at http://www.tech-geeks.org |
| Subscription info at http://www.tech-geeks.org |
