If the connection on the dock is a DVI-D then it may not have analog pins so
a DVI to VGA adapter may not work from what I know about DVI.

Russ Gowin
System Administrator
Technology Specialist
DeLand-Weldon CUSD #57
304 E. Illinois Route 10
DeLand, IL 61839
217-736-2311 


-----Original Message-----
From: tech-geeks-boun...@tech-geeks.org
[mailto:tech-geeks-boun...@tech-geeks.org] On Behalf Of JimHays
Sent: Tuesday, October 05, 2010 8:59 AM
To: Tech-Geeks Mailing List
Subject: Re: [tech-geeks] HP docking station

You can use something like this:

http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=104
1903&p_id=2396&seq=1&format=2

We use them on our Mac Minis all the time.


Russ Gowin wrote:
> I recently purchased a new laptop for our athletic director/science
teacher
> to replace his old one.  He currently has 2 docking stations (one in
office,
> one in classroom) and he said he wants to keep using docking stations.
The
> stations he has now will not work with his new laptop so I'm looking at
> buying new ones.  
>
> Looking at the compatible docking station for his new laptop, I see that
the
> station has a single DVI-D output according to the specs on CDWG, but in
the
> product overview it says that either VGA or DVI UXGA(1600 x
> 1200),WSXGA+(1680 x 1050) resolutions supported.  This leads me to believe
> that it can support VGA with an adapter.  When I talked to my rep, he said
> that there may be 3 different models of this same dock and that he wasn't
> sure which one I would get from them.
>
> I need something that can connect to a VGA cable so he can use the
projector
> in his classroom which is connected via VGA.  I could use the DVI
connection
> on the projector but that would require buying a DVI cable just for his
> room.  I could also just buy him extra power adapters for less money than
> the docking station and just have him plug everything directly into his
> laptop.
>
> I'm wondering if anyone else has experience with this HP docking station: 
> http://tinyurl.com/2v3szeh
> http://tinyurl.com/2wjnlhv
>
> Or any advice on what to do about the DVI to VGA situation?
>
> Thanks.
>
> Russ Gowin
> System Administrator
> Technology Specialist
> DeLand-Weldon CUSD #57
> 304 E. Illinois Route 10
> DeLand, IL 61839
> 217-736-2311 
>
>
> | Subscription info at http://www.tech-geeks.org |
>   

| Subscription info at http://www.tech-geeks.org |

| Subscription info at http://www.tech-geeks.org |

Reply via email to