Hi tech@,
ix(4) does not detects link then cable is plugged in into already running
machine.
ix0:
flags=28b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,NOINET6>
mtu 1500
lladdr bc:30:5b:f3:60:10
description: HW_EXT
priority: 0
media: Ethernet autoselect (1000baseT full-duplex)
status: active
inet 172.16.0.232 netmask 0xfffff800 broadcast 172.16.7.255
ix1:
flags=28b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,NOINET6>
mtu 1500
lladdr bc:30:5b:f3:60:12
description: HW_INT
priority: 0
media: Ethernet autoselect
status: no carrier
inet 192.168.10.3 netmask 0xffffff00 broadcast 192.168.10.255
ix0 at pci1 dev 0 function 0 "Intel X540T" rev 0x01: msi
ix1 at pci1 dev 0 function 1 "Intel X540T" rev 0x01: msi
//maxim
