On Tue, Nov 27, 2012 at 2:28 PM, mxb <[email protected]> wrote: > There is however, no problem then: > > plugged -> boot -> wait -> unplug -> wait -> plug in. > > On 27 nov 2012, at 13:50, mxb <[email protected]> wrote: > >> >> Hi tech@, >> >> ix(4) does not detects link then cable is plugged in into already running >> machine. >> >> ix0: >> flags=28b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,NOINET6> >> mtu 1500 >> lladdr bc:30:5b:f3:60:10 >> description: HW_EXT >> priority: 0 >> media: Ethernet autoselect (1000baseT full-duplex) >> status: active >> inet 172.16.0.232 netmask 0xfffff800 broadcast 172.16.7.255 >> ix1: >> flags=28b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,NOINET6> >> mtu 1500 >> lladdr bc:30:5b:f3:60:12 >> description: HW_INT >> priority: 0 >> media: Ethernet autoselect >> status: no carrier >> inet 192.168.10.3 netmask 0xffffff00 broadcast 192.168.10.255 >> >> ix0 at pci1 dev 0 function 0 "Intel X540T" rev 0x01: msi >> ix1 at pci1 dev 0 function 1 "Intel X540T" rev 0x01: msi >> >> //maxim >
i can confirm that i can reproduce a similar problem. looking at it.
